Don't crush your electrons in crystal lettuce!

Pauleo1214

Well-known member
Build Rating
5.00 star(s)
Build a matsumin valvecaster! This was the first circuit I ever built some 15 years ago, way before I got into building pedals; I was more focused on tube amps at the time.

I found the original in a storage box in my basement. I used a Radio Shack plastic electronics project enclosure for it. It looked fairly ghetto so I decided to revisit the circuit and make it a combo OD.

This thing is loud as all hell for a starved cathode tube circuit. I could hear the electrons breath sighs of relief as they avoided the crystal lettuce. The ghost of Dumble appeared to give me a thumbs up.

For those who have not tried, this is a worthwhile build!

20221031_172455.jpg

20221031_172541.jpg
 

Attachments

  • 20221031_172541.jpg
    20221031_172541.jpg
    1.3 MB · Views: 22
I am surprised this was never turned into a pcb.
I've seen a couple layouts people have done over the years, but yeah I don't think anyone really did a commercial PCB project for it. It would be a pretty good one for someone trying to practice their layout skills. It has the added complexity of a tube socket but otherwise a very simple circuit.
 
Build a matsumin valvecaster! This was the first circuit I ever built some 15 years ago, way before I got into building pedals; I was more focused on tube amps at the time.

I found the original in a storage box in my basement. I used a Radio Shack plastic electronics project enclosure for it. It looked fairly ghetto so I decided to revisit the circuit and make it a combo OD.

This thing is loud as all hell for a starved cathode tube circuit. I could hear the electrons breath sighs of relief as they avoided the crystal lettuce. The ghost of Dumble appeared to give me a thumbs up.

For those who have not tried, this is a worthwhile build!

View attachment 34913

View attachment 34915
Do you come from the land down under?
Vegemite sandwich 😂
 
I am surprised this was never turned into a pcb.
i was looking around for a pcb based tube thing after i saw the dept 10 boost that blackstar did that claims to run at not-starved voltage.. i remember reading some writeup a while ago where someone took the valvecaster circuit and added some kind of voltage regulator to it to get proper heater/plate/etc voltages but i can't find it again..
 
Last edited:
I come from Maryland, lol.

The Vegemite got into another photo on another build thread, much to @szukalski 's dismay. He would prefer I eat Marmite.
This is disturbing. Marmite is the work of the devil. As long as you are sparing with Vegemite it can be wonderful on toast. Here I was thinking that @szukalski was a rational, sensible person.

Having said that I realise that I haven't had Vegemite in years!
 
I didn't know that Kiwi Marmite was different from the UK stuff. I've only ever tried the Pommy stuff (I think!). It makes sense that the Kiwi version would be better. It would have more of a lanolin flavour.
 
This is disturbing. Marmite is the work of the devil. As long as you are sparing with Vegemite it can be wonderful on toast. Here I was thinking that @szukalski was a rational, sensible person.

Having said that I realise that I haven't had Vegemite in years!
My wife (a heathen) works on about 50/50 butter to Vegemite.
Me (a gentleman and always correct) 10% Vegemite, 90% butter, about a tablespoon of butter per standard toast.
I don't want to live forever, I want to eat butter like the French.
 
i remember reading some writeup a while ago where someone took the valvecaster circuit and added some kind of voltage regulator to it to get proper heater/plate/etc voltages but i can't find it again..
found it again..
valvecaster_schematic_regulated-1.jpg
I've seen a couple layouts people have done over the years, but yeah I don't think anyone really did a commercial PCB project for it. It would be a pretty good one for someone trying to practice their layout skills. It has the added complexity of a tube socket but otherwise a very simple circuit.
i'm impressed that nobody traced the dept 10 clean boost one, it's supposed to do the regulated voltages.. i'm suspecting it's similar to above..
DEPT-10-Boost-top-high.jpg
 
Last edited:
found it again..
View attachment 127894

i'm impressed that nobody traced the dept 10 clean boost one, it's supposed to do the regulated voltages.. i'm suspecting it's similar to above..
View attachment 127896
The writeup in that link shows giving it the proper heater voltage, never a bad idea. But the main reason I haven't done a board for the Valvecaster is that I would be too tempted to let it run a 250V B+, and at that point it's not a Valvecaster anymore.

I don't have any reason to believe the Dept 10 is based on the Valvecaster. If I were to guess, it's just a DC-coupled cathode follower with a Baxandall tonestack. Blackstar says they're running over 200V for B+, so I would guess they're managing the heater voltage as well. No gain control because it's only using one gainstage, unlike the Valvecaster, it's just a straight clean boost.
 
Back
Top