Search results

Had a handful of the Xvive re-makes from SmallBear in my cart until the delay pcb (Lectrc FX DC Echo) that I was waiting on became available again. After I received the pcb of course, the chips are out of stock and all I can find are questionable ebay vendors. Anyone know of a listing or shop...

He must be getting a bunch of emails from this board, I feel bad for bombarding him now, I emailed him the same question yesterday after reading it here. Guess I better keep checking so I don't miss them this time.

Nevermind, found the right value in a regular MLCC. Not sure how to delete this post, so just wanted to let people know it's resolved.

I'm only missing one part, C25 is a 330nf capacitor. I have radial tantalums in that value, but just want to be sure (a) that this is an ok substitute and won't fry the IC it's connected to or cause other problems, and (b) which hole the positive lead of that cap should be going in. If anyone is...

Thanks everyone for the replies, looking forward to firing this one up tonight after work.

Hi, I've got a few boards from RW nearing completion, the King Tut is up first. However, I didn't order any of his 3pdt breakout boards and I'm not entirely sure how to wire up the footswitch, especially with the LED. I emailed him for a diagram but haven't heard back yet, any help on which pads...

Unreal. Sometimes you just need a fresh pair of eyes. Now, any tips on how to deal with the striped end solder pad? I swear I did not tear it out while removing the backwards diode, but I definitely do not see it there now. Can I link that pad somewhere to fix this and not have to take a third...

I finished the Wrectifier build this evening, thought it looked pretty good and went smoothly. Plugged it in, and nothing. Checked the voltage going in on that red wire, it's around 9v. But when I go to R1, R2, and anywhere else in the circuit I get 0. Any help is much appreciated, thanks.

This one is going into the Dark Rift delay pedal, which looks exactly like the picture above. Thanks so much!

Hey All, question about these breakout boards, I've searched all over and can't find an answer anywhere. If the build doc has jumpers linking two or more of the solder lugs on my 3pdt footswitch, are those already accounted for in these boards? Or do I need to solder them across the top of the...

I actually got this figured out last night! First, the pics in their instructions were slightly off and I miswired lugs 1 and 5. Lug 8 on the switch was not getting voltage and I had the dc jack wired wrong. Switched those two red wires, replaced the faulty switch connection, wiped down the...

They are. I actually soldered in the LED because I was worried it might be a power supply issue, plugged it in, and no LED light. I pulled the DC input jack entirely off the circuit and plugged it in on its own. There's a ground and two positives. When I touch the black MM probe to the ground, I...

Hey All, first post here so apologies if I'm breaking any kind of rule or etiquette. I finally got this together last night, it's my second non-working attempt. The schematic is on page 25 at http://byocelectronics.com/treminstructions.pdf. Signal goes through the pedal fine when it's switched...