Search results

Posted too soon, looks like they finally just printed it and shipped. Appreciate the assist SYLV9ST9R, I'll come back to you if it arrives and looks awful enough to re-order. Cheers!

I have an old pdf saved in my Tayda Drill Box that I'm trying to use for a recent order, have the svg file around somewhere. I canceled my Adobe Illustrator account because I wasn't using it enough. The file I'm trying to use for Tayda has a gloss layer, but I didn't order gloss service so it...

Two Tone Fuzz, other than the two toggles, is it a standard PPCB 4 knob drill template?

I used red, not sure if that was right but it sounds good.

Did a schematic for the Flock ever make the rounds on here? Been searching and I can't find it.

Resurrecting a zombie thread, I'm having the same feedback issue with my flock. Did you ever get this one sorted?

What version would it be if I just did what was silkscreened on to the PCB? It sounds pretty good.

Whoa thanks for such a detailed response, FF! Warp control seems like a great option, I'll be sure and post back here with results if this works out.

I have the micro addition boost, really nice clean boost but I'm wondering if there's a way to make it grit up a little more without pissing off my neighbors too much. I've got a spare Trimmit board around somewhere, is there a spot I could drop that in to make it dirtier? I'm looking at the...

I thought about that as an option, but was hoping to keep the audio taper in while adjusting the sweep to be a little earlier and possibly louder at higher settings than it is currently. If linear turns out to be the easiest solution it's likely what I'll go with. Cheers!

My pharmacist build is working and sounds great, but I'm a little disappointed by the volume control, hoping to get some more mileage out of the first 50% on that pot. I know it's not supposed to be super loud without things cranked but unless the gain is at noon, the volume is well below unity...

Resurrecting this thread for a second, since it already has pics in case they're needed. Is this thing supposed to have kind of low output? It may be that I'm used to pedals hitting unity a little earlier, but the first 50% of the volume control seems fairly useless. It may be normal, since in...

Just boxed it and fired it up, works great. Thanks again!

That did the trick, I think. Getting sporadic light when everything is making contact, turns off and on with the switch. Thanks so much for your help. Really strange, what could be the cause there?

Tried multiple LEDs, no difference. The one I'm currently using to test lights up when tested with my DMM, and when pressed to the matching legs of the other LED. Anode is reading 8.94v. Def a head-scratcher for me.

Yes, cycling the switch gives me a ground connection at that 3rd pin from the right.

Yep, that was my first step - always good to know I'm on the right track. I have continuity between the anode and r38, but none from the breakout/footswitch on that pin, on that side. I do have ground continuity with the footswitch ground pin.

Ha, yes there was one in there but I de-soldered it while trying to troubleshoot. Easier to get in there without it in the way. I usually test my leds in the holes loose before soldering, since they'll light up as long as they're making contact. Edit to add - part of the reason I removed it was...

Haven't had an LED issue in a long time. Got my pharmacist all populated, tested it, soldered in the LEDs and while the boost side works normally, the bypass side doesn't light up. Treble and bass trimmers are wired up as normal pots. I've been poking around for continuity on the LED side, and...

Ok, here's an interesting twist - if i turn down my guitar's tone knob, the frequency changes and when tone gets low enough the squeal goes away entirely. it's totally muffled sounding, but I've tried two guitars with HBs and single coils with the same effect. There is no squealing without a...