Search results

What does Tuesday mean?

I need my PedalPCB fix..... I cannot wait for the new G3, G4, and Dwarven Hammer boards to come in. Anyway to get bill of equipment lists for these projects?

I added the mid control to my Thermionic Distortion to make it a Little Debbie by making a vero board. It works. If anyone is interested here is the vero board. Just remove C18 and R21, and add this into your pedal.

I tried the pedal again, the click or distorted sound happens mostly on low notes or if I strum the higher notes harder. It sounds like it is only the delayed notes making this sound

Here are new voltage readings: TL072 1 = 4.26 2 = 4.26 3 = 4.26 4 = 0 5 = 4.26 6 = 4.26 7 = 4.26 8 = 8.53 PT2399 1 = 4.97 2 = 2.48 3 = 0 4 = 0.05 5 = 2.66 6 = 2.41 7 = 0.92 8 = 0.93 9 = 2.48 10 = 2.48 11 = 2.48 12 = 2.48 13 = 2.48 14 = 2.48 15 = 2.48 16 = 2.48 With all controls off clean...

I tried it again today, and it worked as it should. Not sure why it had noise before.

I will try a different PT2399. Only ceramics used are for Pico farads.

Thanks for the reply I cannot wait to buy the Revv G4 and Horizon PCB’s!!! I know you are probably waiting for your supplier to make them but if you could get material lists posted that would be awesome. Takes longer to get parts from Tayda.

Is there a way to find out what new PCB's you are working on? You mentioned that you were going to do the Revv G3? How about a way to donate money for you to buy a pedal that we want to see you design a PCB of, and by donating (a certain amount) we would get a PCB?

I built one, too. But my build has a lot of noise to it, does yours?

Since you do not have the schematic up for the TB yet, I am curious if these are the same designs?

Looks like my old topic on this was deleted from the server transfer. I got my Seabed delay working, but I have a bad PCB. I had to lift the one side of R16 (closest side to PT2399) and solder a jumper wire from the lifted side and connect to PIN 12 of PT2399. Why, using a DMM, R16 was...