Search results

Look guys, it's a completely different mythical creature. This is clearly a Satyr, not a Centaur. Love the sound of the Kliche Mini. Such a great circuit Demo:

I build mostly pedal pcb and guitar pcb. Both are excellent and offer kind of different takes on similar effects so you can broaden the catalog of effects you build

I have the Monport K40 Co2. Bit of a learning curve for me, and put a couple of hundred in upgrades into it, but have it dialed in nicely now I think.

Been experimenting with my laser to find which works best for me. First up, the seabed delay which I've renamed Sea Swell. Love this delay. Great variance from nice snappy slapback to weird trippy ambience. Next, the Blue Breaker, which I renamed Purple Gain because I had the enclosure and...

Looking for a pcb that I can have two active pedals plugged into and switch between them. Not an order switch loop, but something like the jhs switchback? Any help appreciated

Good morning all. Just wondering if any of you who have used Tayda for drilling service before have the coordinates you enter for the endcap on a 125B for the 2 jacks and power out? I prefer to drill the top myself, but hate drilling the ends. So was thinking of ordering a batch with just the...

Ok, thanks. I have some blanks, the pedalpcb drill template and a drill press so I can still drill out myself. I've just been spoiled by using the pre drilled ones recently!!

I've got lazy about drilling recently and have been ordering the pedalpcb drilled enclosures. I've a few tone bender pedals and cracklejacks and went looking for 2 hole drilled 125b but couldn't find any. Do they not carry them or am I searching wrong?

All of these were made using cricut. For some I designed the film free decal and used the print and cut feature to make sure it was perfectly sized. Others it's a straight vinyl application, and a couple of them are stencils I cut out with the cricut and used to spray paint the graphics. Cricut...

Awesome work and thanks for the response. One last question. I see Laserpecker 2 and Laserpecker 2 pro. Do I need to get the pro or is the basic 2 ok?

Interesting. Do you have to do the pedal in 2 parts? For a 1590bb pedal, it seems like the 4x4 inch engraving wouldn't be great. But I love the compact design. What make it easier than others. Do they not all generally use Lightburn or lsrgrbl?

Hi all. I'm currently using either a vinyl cutter to cut stencils and spraying graphics, or no film waterslide for graphics. I like the idea of the precision a laser engraver gives me. I'm looking at the Atomstack p9 M50 engraver. Its a 10w output and small footprint. So suits what I want to...

Awesome. Thank you. I'll socket it and try both (and also order the 5532 so I can change when I get it too).

I'm currently building the Grover Drive and realized I do not have the NE5532P chip. I have the following on hand. Would any of these work (I'm assuming the first one, but want to make sure) NE5534 OP07CP TL071 TL072 LM358 NJM4558 Thanks all

So I figured out what happened. I was victim to my own stupidity. I had my in cable plugged into my out and vice versa, so once I corrected my stupidity, it's working just fine!!! :ROFLMAO::ROFLMAO:

Here's my very very VERY dumb mistake of the week. I built 3 pedals this week. Before I box a pedal up, I always test them on the micro-proto board. It's been a life saver. I built a Blue Breaker, a Cracklejack and the Zapper. All 3 got no sound. I also have an audio probe, so I took them off...

So, I did this with an A10k. Going to test soon. Thanks for the advice

I do, I have a bunch of A10ks

I'm building the Park and Ride, and realized I don't have a C10k pot. I do have some C100k pots. If I run a 10k resistor across lugs 1-3, that should theoretically get me to 10k. Is this a workable solution? Thanks all

Hi all, Just finished up a couple more builds. I had an issue with my film free waterslide on the Cujo fuzz. I'm starting to get very annoyed with the graphics. I think I may invest in a small laser engraver to apply text labels. The Cujo Fuzz. This is the second time I've built this. The...