Search results

Did pedalpcb ever make a version of the eqd bellows? Or do they still I read online someone said they built a bellows from here … I don’t see one here

I’m having this trouble right now and I ended up using the oc140 as well.. both transistors are mullard black glass… I used another oc140 that had 88hfe and that sounded choppy and cutting on and out and was unusable just like the 0c139 I’m. The one that works well is a 0c140 with 77hfe would...

Ok I didn’t know that I thought maybe somehow the buffer can be installed into the same enclosure as the kliche mini. I also thought that the kliche buffer is just a standalone unit… thank you I just wasn’t sure if the buffer was an add on. Thank you

Is there a way to install the kliche buffer inside the Kliche mini? Is that how it’s supposed to be wired? Like a Hotwiring way with a toggle switch to turn on the buffer or it stays on when used ? I don’t think the schematics are up yet. I think I have an idea how to put them together but I’m...

Not sure how to do that I thought maybe an administrator has to do that . I used the trusty magnifying glass and figured it out. Thank you everybody for your help.

I figured it out sorry I should’ve have posted it sooner… it must have been my old power strip because when just powered by a 9v battery it runs and sounds great…

Nice i also figured out that it a good thing to do after bench testing and then installing into the enclosure is to re solder the pots and make sure the solder didn’t break while tightening the pots to the enclosure I’ve had this happened twice for some reason when I print out a template it’s...

I used alien tape before I stocked up on covers

I was thinking that I should have never used this 3pdt board and just followed how it is in the directions but I thought I’d be good with one 3pdt board on that one side … NOTE I CHANGED THE C100 CAPACITOR AND SWAPED THE TWO WIRES ON THE SWITCH WITH THE BOARD (THE GND AND SW ) and it’s working...

They should be labeled on the board and in the building documents… naw but I’ve seen the gnd and sw moved around before it sucks it should be labeled in the building documents it’s probably because I used this 3pdt board … I put my voltmeter to check Continuity on the grounds and I undid the...

I thought of that and swapped the two middle wires from the switch ….. it made things worse…. The pedal plays fine and all but that led stays on no matter what it’s a bit bassy pedal and the boost switch or heavy isn’t working really and the led who’ll get brighter when I turn the input knob up…...

That’s a mania one I’m running low on the pedal Pcb ones

Hello everyone I just completed a Arkaim fuzz and I’m not sure if it’s working correctly… I was bench testing it and I noticed that the led has power when I don’t think it should. The led was dim… I saw other posts about wiring but I pretty sure I did it correctly… I thought may have had the gnd...

Someone needs to dissect it from the original and get down to the bottom of this because it looks like someone just makes a copy and then everybody else is just a copy of that copy and you know how the saying goes… I’m done with that circuit… but I had difficulties with pcb manias ash Device and...

Do you think another transistor can be used I wonder if a 2n3904 can be used… I have no idea … I also think my solder is to old and expired… but I have built 11 other pedals with the same roll and haven’t had a problem.

Where are you getting the 2n5088 with such low hfe? I haven’t seen any lower that 535hfe?I purchased 2n5088 from Tayda and stomp box parts… no luck I bought 130 of them

I use safari… I haven’t cleared any cache in since I got the phone a year ago hahaha…

Unable to search using my iPhone iOS 16.1.1 is anyone else having trouble? When on pedal pcbs webpage and I click on the three bars in the upper left of the screen then I click to type something in the search box and I am unable to… the page won’t fully load its been like this since November...

Good tip I re did those purple ones and they are soldered on the other side I will wick from now on I always wondered that and thought they maybe cold solders I will re-do tomorrow morning thanks for your help I’m grateful for the pedal pcb community!

It’s all out out the box now… that’s a good question… I unplugged the input cable and the noise is still there… the Q3 thing was a typo I will edit that it’s 7.7v at Q1’s collector… I use a old Hakko dash with solder that a friend gave me a long time ago I can’t even read the size or ratio on...