Search results

Do you have a mac? I was reading about there being some compatibility issues for people on amazon with this printer.

Are Brother's really that bad? I usually have had HP printers in the past and never liked them and was leaning toward Brother because of the price point/good review ratio online for a color laser.

Thanks! I did my best. I felt like I was playing wack-a-mole trying to adjust it.

Thanks for the tip Barry! I used barely luke warm water but I added a tiny bit of vinegar to it because I read it helps soften the decal on a different forum, but I'm wondering if that actually made it worse. I played with it for far too long because every time I would fix something another...

Looks great! I was on the fence about doing Tayda's UV printing but this has definitely sold me.

This is only my second attempt doing a waterslide decal and I had an extremely frustrating mishap with the border. The decal started moving around and appeared to be shrinking so I did my best to save face and get it as straight as I could, but I think I overworked it. I've watched and read...

I'm looking into getting a laser printer for printing decals, etching some homemade PCBs, and general day-job-related documents. I've been trying to look around, but haven't really seen a general consensus on a good one. My budget is probably upwards of $500 but obviously would love to spend...

Congrats! Nothing more frustrating than a pedal that doesn't work after putting all that time in inhaling lead fumes hunched over a hot soldering iron. There is a good workflow thread on here you should check out if you are new. I would take the fluxing everything part with a grain of salt, but...

As suggested pictures please! I just successfully put together a Kliche after a losing streak of troubleshooting issues myself. Happy to help if I can. If you have a probe then use it! I just use a breadboard with a spare jack, capacitor, test lead, and my guitar. Not trying to be patronizing...

Been talking to you on the other post. Did swapping out R5 help?

Congrats on the Butcher! It is the old one right? I was debating getting one of those but ended up recently getting a JCM800 reissue myself. It sounds great, but the FX loop is broken so I had to take it in to get repaired and I only had a day to play it. HM-2(promethium) into a JCM800 sounds...

So I'm putting this together for a friend and this is actually my second attempt because I got so frustrated with the first that after all the socketing and desoldering the PCB was pretty mangled. Anyway, the issue I'm having is an insane amount of hiss/noise. It isn't a hum like 50/60 cycle...

So firstly I love the Muzzle, it works great! The only issue I'm having is a high-pitched squeal when running high output pedals on extreme settings into the input. My first question is, how should the grounding go for the Key and Passthrough jacks? I noticed on this version of the board there...

I'm having a really hard time getting along with mine. I keep thinking maybe I messed something up in the build but everything checks out and I tried running it on 12v and 18v. Earlier I socketed the c19 and played with different values which made it slightly less dark, but I think it might have...

Appreciate the input! I think I'm going to socket that 680p then as well. Sounds like a pretty cool pedal, I hope I can get it close to the demos for him.

Im building one of these for a buddy whenever the PCBs get here. Ive read some stuff about the cap values being different than the original/there are a million different versions of the original. Any tips for this build? Should I socket all the 680n’s?

Just wondering for those of you who have put one together, does yours sound extremely dark also? I have to turn the presence knob up all the way along with boosting the treble quite a bit to get a useable tone. I saw it was suggested to possibly change or remove C19 to make it brighter so I...

Thank you sir! That is what I thought.

So I have a few of the jacks listed in the Muzzle build docs on order from Tayda, but I was wondering if I might be able to use some of these other switch jacks currently in my possession. The boards got here much sooner than anticipated and I'm anxious to get started on one (thank you PedalPCB...

Update: Built the JMK Paralyzer on stripboard. I hardwired send tip 1 to promethium IN and return tip 1 to promethium out. I connected send tip 2 to the tip of a mono switch jack, send jack's switch to return jack's switch, and the return jack's tip to return tip 2 on Paralyzer. (also...