Search results

I'm searching for a preamp/aiab circuit that can get relatively close to mid 90s Trey/Phish tone (Mesa Mark III). Not the TSx2 into Ross part, but the amp tone itself. Haven't come across much in the way of Mesa Mark series voiced pedals. Plenty of Dual/Triple Rec ones, including the Dr Boogie...

Would it handle the XLR output of something like the Fender Tonemaster Deluxe Reverb, which has an output volume control?

Is the Natas still in the works?

my man!

Thank you, Robert! Appreciate all you do!

Gentle nudge on the Angry Andy Plus. Muchas gracias!

Robert, any chance the Angry Andy Plus build doc will be available in the near future? I already got the pcb from ya. Thinking about tweaking the boost side a little and could use the schematic. Thanks!

Thanks! That works.

I almost ordered this board in my last order, but the absence of build docs, including not being to download the parts lists doc (at least not on my phone which downloads every other build doc just fine) prevented me from doing so. I've learned to check parts lists ahead of time so I don't wind...

Checked, both 47k as called for.

Finished the Aionfx Elysium (Ibanez EM5 Echo Machine) yesterday. The effect sounds great, but the dry signal is considerably louder than with the pedal off, making it nearly unuseable unless always on. The pedal has control for the Level of the repeats, Feedback, and Delay, but not the dry...

Well, I guess the logical approach would be to try them both and see.

Just getting started on a Sabbath Distortion for a buddy. For the BC184, I'm ordering it from Amplified Parts, and they offer the BC184 in a B or C version with the difference being the gain ranges: B 240-500 vs C 450-900. Any recommendation on which to go with?

Stoked for this one! Glad I accidentally requested it. Lol

I used 1uf electrolytics for the 3 tantalums, and it sounds great with bass. Does exactly what I wanted it to do. I think I'm gonna leave it as is. Coincidentally, I just looked at the Fuchs webpage for the Plush Pure Gain, and this is what it says. Lol Thanks for the offer to send some! I'll...

@MichaelW The 1uf tantalum caps in this one, would it be problematic to substitute electrolytics? Tantalums seem to be hard to get in a reasonable time frame. I ordered some from Amazon that said they'd be here in 2 days, then after I placed the order it changed to mid November. Haha! Otherwise...

I'm super annoyed it was that simple and I couldn't figure it out. Thank you! I've been using the 2 terminal lumberg style power jacks mostly. These 3 terminal ones for batteries came with Stomp Box Parts' "essentials kit". I swear I googled the pinout and saw power supply on that pin and...

Fwiw, I used an MLCC for the 47pf in C4

I have 4 dragons breath pcbs for a small batch. I haven't built this one before. Built the first one. Nothing. Passes signal in bypass, LED lights when activated, no sound. Triple checked all the parts were correct values and correctly oriented. Reflowed solder joints. Tried a second 2n2222a...

Thanks. 🤦‍♂️ I have the short-term memory of a hamster.