Search results

https://www.pedalpcb.com/product/pcb639/

You win…

Which one? Yo my did great with the Electrovibe…

Bump…

Well maybe if you stopped focusing on build docs you’d have more time…

I built the adult-sized one, and it took me ages to get it dialed in, so I second the suggestion of doing that; twiddle some trimmers, experiment with LDR placement (be careful, though)…

BC108 would be Q2, and the 404 would be Q1. I would recommend building the circuit with sockets so you can audition different transistors…

Or like writing “whatever the hell we have on hand at the time” across the schematic in red white and blue crayon…

Still hard from this one…

Also, if possible, can you please post a photo of the soldered side of the footswitch?…

First things first: go back and touch up all solder joints. Just touch the tip of the iron to the joint for 3 seconds… If still no joy we can move on to step 2 and 3…

Well, I read for the info, not the personality. You would want to try and match the measurements of Q2 and 3 in a Ge Tonebender MKII: 70-ish hfe for Q1, and 120-ish for Q2. You don’t want it too leaky, but the stuff you posted in the OP should work. Some of those transistors would work great in...

Yea, that’s a voltage inverter. The OG was Ge/PnP. To run that circuit with most power supplies you have to flip the voltage… Check this out: https://www.diystompboxes.com/smfforum/index.php?topic=120704.0

Fuzz Factory has more in common with a Tone Bender MKII than a Fuzz Face…

Working on an Albini tribute Percolator and this thread just saved me a fair bit of leg work. Now I can go and build something. @fig would approve…

You should be using the middle lug and one of the outer ones. The third one is unconnected…

From what I glanced over, nothing popped out. You’re really the only one that will be able to tell for sure, so we’ll have to help you figure it out. https://forum.pedalpcb.com/threads/troubleshooting-101.9028/ There is a lot at the above link. As for the probe, you can definitely follow the...

Ok, that’s as it should be. Time for a probe. I usually use my output jumper and just go back and trace the signal…

Are D1 and 4 backwards?…