Search results

I am putting together a Twin Face, and I was curious if I could use a 4pdt latching footswitch in place of a 4pdt toggle to be able to switch settings mid song. In my brain I think it'll work, but I just wanted to put it out there before I did something crazy wrong. thanks

Here are some photos.

Hey, I just completed my 2nd twin face fuzz. First one came out perfect. 2nd one works when the toggle switch is up (i believe that's the silicon) but the down is just silence. and it works in bypass. I touched up all the solder points on my transistors, and in the switch. Not sure if...

I was actually looking into doing this mod. Curious how yours turned out. Got any pictures of how it ended up?

I’m using my Weller soldering iron. I’ve used it for a few other pedals and haven’t had a problem. There’s no temperature control, but I may have been going too quick the first time, and not allowing the solder to flow all the way through. I went through and reflowed solder on the joints...

Hey friends, I’m building my 2nd cataclysm delay (first one is great) however when I turn this one on there’s a crazy oscillating-esque squeal. You can still faintly hear the delays under it, but it is super noisy. I checked all my resistor values, checked my solder points (I think I got them...

Fantastic! I knew there was something simple I was missing. Thanks so much!

Hello, I have an Amentum Boost that works and sounds killer on bass when boosted. I was trying to add a master volume to get that boosted signal tone but still be able to regulate volume to match hen in bypass. I added an A100 pot going out from the footswitch to the tip of the output jack...

Just checked it. The wires are all going to the correct places on the PCB.

I just wrapped up a kliche mini, and it sounds good in bypass. When I click it on the volume and tone work but there is no gain. When I roll it off it kills the signal, but there’s no drive when you push it. Any idea where the problem may be?

Hey, so I’m working on my 2nd ADHD. For the 220uf caps I used 16 volts on my first one and it works great. But I accidentally ordered 25v for my current build. Just curious what difference this would make. I noticed they are larger than the 16v in my first. Still new to this and I figured I’d...

thanks!

Hey, I'm sourcing some parts to do a Percolation Station, and C2 calls for a 50n cap. I'm having a difficult time find one on my usual sites. Would there be any major issues using a 47nf or 56nf instead? thanks in advance!

Thank you so much for the reference, I'll tinker some more and look into a temperature controlled iron.

So i took off and redid the wires to the power, and swapped to a different LED. When I touch the leads of the LED with the multi meter they light up. But when its plugged in and powered on it still only works in bypass mode. when engaged there's a small repetitive clicking sound but no guitar...

So I took the LED out and checked it with a multimeter. It lit up when it was out of the circuit. When I soldered it in (Positive to A, Negative to K) it will not light up with the multimeter or when the pedal is plugged in.

yes, the DC jack is correct. I'll try to touch up some of the soldering locations. thanks.

Hello all, this is my first non-BYOC build so appologies for it being a little sloppy. The pedal works in bypass mode, but when it turns on the LED won't light up and there's no sound. any help would be appreciated. thanks!