Search results

Thats a really cool idea! I think I have an extra 3008 around here, I might have to check that out when they get here.

I use something like this. It is an embossing heat gun that my wife had, and I've totally stolen it from her for soldering SMD IC's.

Due to the bad influence of others on this forum, pushing me to explore this more, here is something I finished up today. It is a 2 BBD delay, giving 600ms of delay time in a 1590A. This has a charge pump to drive the BBD's at 15V, and I added a switch to tap into the first BBD, hopefully...

You guys are a bad influence.... Here is the next revision with 2 BBD's, 0402 SMD chips and a switch to tap into the first BBD chip, hopefully giving a sort of rhythmic delay. I'll order this up on my next PCB order.

They are 0603's on this. Who knows, maybe I should go crazy and do 0402's :)

A ton of SMD on the bottom! The Compander is what takes up the majority of the space on this. Cool Audio makes a SMD version of the V571. I think I might be able to get there using that, that might open up enough space for the extra BBD and bias trimpot.

The plan is to demo it the Altered Space week after next, hopefully I'll come up with something cool for it. Its not so bad dealing with them once you figure out how to export everything the correct way :)

Here is my monthly dump of what I've been up to, what I've been finishing up... The Exterminator Jr. is a take on the EHX Clone Theory, just shoved into a 1590A. This is using JLCPCB's SMD service again. It is running a charge pump and MN3007 on the inside. Sounds just like the bigger...

You are definitely down the Rabbit Hole now! There is no turning back. Looks like we have the same ideas, the Ray Gun is a lot like the Death Ray Deluxe I just finished. Its a Timmy into a 5-band EQ, with a loop.

Looks awesome! Glad you were able to make the switching work for you!

Through JLCPCB, I get 5 of each board. Yep, those are the relays for the switching.

It wasn't so bad, cost wise. Not as much as I thought it would be even. When I got the number, divided it by the amount of boards I got, it ended up being pretty close to what I would have spent on resistors and caps and stuff. I figure its a win since I didn't have to do all the work myself.

Here are a few of the builds I finished up this weekend. Pandemonium Jr - This is a take on the Boss BF-2 in a 1590A enclosure. I wanted to try and make another flanger in a 1590A enclosure, but knew that the only way to make that happen is to go the SMD route. Knowing what a pain in the butt...

The Cosmic Rift is an Electric Mistress, running off of a V3207

Yep, everything you see me make is my own PCB

Here is a dump of a few builds I've finished up in the last week. Some of these have been done for a while, I just got off my butt and did some art/powdercoating/etching/drilling to finish everything up. Lets start with a Quad-fecta of Flangers (I have another one in the works, but need to do...

Here is my take on a Univibe pedal in a 125B enclosure. This pedal took some cues from the PedalPCB Electrovibe, Madbean's Harbinger, and a little from my own Spiralizer Deluxe. The start of the circuit is a switchable buffer (the vin/mod switch). Then is the normal Univibe circuitry, with...

Ding Ding Ding! We have a winner :) I was a little mad when I noticed that boxing it up last night, but not mad enough to fix it right now :)

You might see this in an upcoming build report from thewintersoldier as well, but here is a triple overdrive that I finally got around to boxing this weekend. Chris got in contact with me to design up an overdrive comprising the big three in a dirt section, a Tube Screamer (Dunes flavor), a Rat...

I sit in one of these: Its a Setu chair by Herman Miller (I also make these for a living)