Search results

Those graphics!

With the DMM set at “20” I get 9.25 volts at the dc jack and some voltage on the top switch lug, the SI diodes, and R12. It started at .82 and the longer the pedal stays plugged in the amount drops. After about a minute the numbers are around.38. There are 2 of the 4 LED pads that I can reach...

This is R12?

Ok thanks. As far as a solder bridge I guess I would be surprised of that since the LED setting was fine the several other times used the pedal. Sound right? For the switch lug, I would set the switch to "LED" clipping, and measure the lug that is the opposite of the direction the switch is...

To check that I would use my DMM, checking LED pads the bottom of the PCB? And this is a high voltage circuit so I would need to be careful not to touch anything that would electrocute me, right?

My Lab Rat is sounding gated as a note fades or is gently plucked on the LED clipping selection. It does not do it on the 1N4148 selection. Picking hard it seems normal. It did not do this previously. I don't see anything jumping out at me looking at the guts. Anyone have any suggestions on...

This guy looks like he was into them also.

I mean, he was announcing for years that he wanted to do more tariffs, particularly on China, so one shouldn’t have been surprised that there’s more tariffs…

Thank you for all of that! “You bounder, you cheat!” -John Lennon

I just build for myself and mostly get parts as needed. How many of the 2N5457 would you get to get a matching pair?

I have BAT41 I believe.

Thanks!

oh great thanks! They very well might have them then by the time I am ready to order then. I have saved carts for 4 PedalPCB builds. But I’m also out of work so I don’t know when I will actually order. But by then they might be out of something else in my carts lol.

The build doc has notes about the parameters for the transistors. Are the 2N5457 ones sold at PedalPCB fit those parameters? And D1 & D2 are BAT43 which Tayda is currently out of. Are there other diodes that would be an acceptable substitute?

Someone with more knowledge than me will definitely post, but I was instructed on a couple of times on troubleshooting threads to start at the beginning and follow the signal path. In the schematic, that is starting on the left at the input, then proceeding to the right. So after the input jack...

Cool guitar. It can do all the Strat and Tele sounds, plus be a Les Paul

14 for $25, that's a pretty good deal then.

All 3 look great, but having seen Pearl Jam 19X, I am partial to the Plaid. Plus the all black thing looks cool.

It took me a few listens to “get it.” It’s totally unique. And beautiful.

I don’t know what to tell you but if no one answers here, you can start your own thread in the Troubleshooting area. Include pictures.