Search results

So yes, by the schematic the internal connection between pins 8-9 could be bad (if the jumper between 4 and 9 is good)

Well, now that I see it that way, I might have been totally wrong ! So yeah that invalidates a lot of what I said ... and that switch might really be bad.

@BrainDrain Edited : You are right ! 2 and 5 are for the signal to come in and out (of the switch). 3-6 jumper is where the signal is routed when bypassed. 1-4 are the signal going to and back from the circuit. SO, from the IN pad, the signal will go straight to pin 2 of the right side...

Same as @MichaelW here, I built one in a 1590BB and it was squealing like hell. Tried everything to get it to work and could never find the problem. It was my first build, so I could have missed something.

Edited since BrainDrain opened my mind : My guess, check the left side bypass. May be a problem of bad switch. Check continuity between pins 8 and 9 and jumper from 4 to 9. 2-3-5-6 when in bypass... they should all have continuity. Find if the problem is the 3-6 jumper or bad internal...

What is the size of your artwork in "mm" ? From your file information it's oversized at : For a 125B : artboard size 62 x 117mm Yours would be about : 258 x 487mm.

That is so true, thank you for correcting me. I always get a white layer under me color UV prints (if not already printing on a white enclosure). IF I have a part of my design that needs to show as white (pure white), I go for the print white twice option.

I would say, if it's FFFFFF you put it in the White layer, else it go in the color layer. Here is my reasoning. What goes on the white layer is what a normal color printer would not print, so if there is any color pigment it's not white.

Definitely red 2nd from top... but surely no 1.2 gigaohms

Here's a pic of mine that's really sounding fantastic to my ears and others at least. 😉 I took it under good lighting so you can compare it with yours ?

I see the 2nd band purple ... brown pruple black red brown. 17k ?

Last I checked they did not post anything in years

Look at a few build reports here, you will understand how it all goes together

Your document has only one layer, named "Layer 1". Tayda wants you to have your layers named, from bottom to top : WHITE, COLOR and GLOSS-V or GLOSS-M Also, is there any white left in your design ? There should be no white in the color layer. I've done at least one project without the...

I just googled for medusa images in black and white and picked a few that I liked and tried them to make a final choice. Then used inkscape to auto trace it and reworked everything bit by bit to have the image cut out of a black background.

Thank you, gloss over black and luckily I had no QC error on that one.

Just finished this one last night. Everything worked as it should first try. That is really satisfying. It's my second chorus build after the AionFX take on the Small Clone and I took extra time on both those builds to pick the closest values I could find for each component. It really paid off...

I get it's not the look you wanted but I think it's kinda cool, like an aged finish.

Thank you ! Someday I might try with a 125C OT, but for now I just don't have enough time.

I had a bad 12AX7. Ordered 2 of those and tried it with those. It’s now alive but still too quiet for my taste. I want to test it on another speaker. But my heater voltage needs to be checked first. That's the only voltage that looked out of spec.