Search results

I’ve got a buddy who wants something to warm up his synth - analog saturation. If I wanted to make a stereo/dual in-out B-side Fuzz would it be as simple as two boards and dual-gang pots and TRS jacks? Or is it something more sinister/technical involved?

Built up in the last couple of weeks. These were a lot of fun and very satisfying. Horchata = Pendulum Hygge = General Tso 1982 = Informant Drive

Could I sub a 2.2M resistor for a 2.7M in R11 and R12?

Hey gang! I have an unpopulated Caesar Chorus PCB and a couple of questions: I only have A250K for the LAG pot, how will it affect the sweep?/should I just use a B250K pot? Could I also substitute the 1N914 for a 1N4148?

Is there a simple explanation/diagram with regards to adding expression control to any given parameter/potentiometer via TRS foot-controlled means?

I built this the other day and it works except that the toggle switch in the down position delivers the effect - in the up position the signal passes through with no effect I’ve included two layouts as well as the schematic - I followed the “Fredrik Lyxzen/JohnK 4/7/14” layout I also see that...

Real Spring Reverb in a not so small enclosure. For the analog purists sick of DSP; @bjfeffects brings you the “Analog Reverb” available as a kit through @primofx_llc (if you live in the USA) I became enamored with spring reverb through my RE-301 Chorus Echo with its rich ambient tones and washy...

Finished this PCB tonight and loving how it sounds; so versatile and true...first idea, best idea

Another one...love these PCB’s! Sounds so good! Gonna dial in the gain trim pots tomorrow.

Hey gang! I just ordered a Duocast PCB and I am super pumped! As I am sourcing parts I am having a hard time finding an OC71 - However I have a random assortment of Ge transistors from 3pdt. Is there a way to socket Q2 so can experiment with different transistors? Like, should I just solder...

Just built up the Sea Horse per a customer request and I should’ve ordered another because I really like the way this pedal sounds!!! So many combinations yet it can be subtle and doesn’t boost the volume when engaged. I Love these PCB’s

Another one... The Hydra Delay! Total build time was 5 hours with an hour break inbetween - and that includes drilling the enclosure. I’m loving these PCB’s! And the delay is one of my favorites, so vibey and sits well in the mix. I love the Swell the best and how it ramps up with It’s bleary...

The PedalPCB “Deflector” - my first PCB with a pre-soldered FV-1 and I am hooked! I love these layouts and it encourages me to keep pursuing the craft. Love you all and I hope you are well and making the most of this timeline. ✌️ next up “Hydra”

Just built up a deflector and it passes signal but there is no effect, super bummed..