Search results

Diggin the zigzag layout, and super neat innards 😻

Only deviations form the build doc are R12/R13 which I've replaced with 12k and 22k, respectively. This was done to bring the volume of the dirt channel closer to that of the clean, while avoiding oversaturating the buffer preceding the filter. Rebiasing that buffer could probably gain a bit...

Haven't tried it yet, but I'll run it through the Marshall and Mesa sims on the Opus after work today. I'm assuming it'll sound good, though- It's essentially just a higher gain Tube Screamer

@MichaelW wanted to know my thoughts as he recently built one, and was also less than impressed, so here's this little rundown. Built to the doc except for the clipping diodes- I replaced one of the silicon clippers on the Rhythm side with an IR LED, and replaced both clipper on the Lead side...

Peruse my build reports - it's a service they provide in exchange for treats and clean litterboxes

Something acrobatic, and something oroidean

That's normal behavior for this family of circuits. The easiest mod would be to add a smallish value resistor to lugs 2/3 of the Gain pot. Start with 10k and adjust up or down to taste

I think that's just what they call em. They seem to be pretty standard 125B sized

Impulse bought 41 bare B+ enclosures from SynthCube during their 25% off sale Guess I'll be getting my punching on

The resistors all look good. Hard to see some of the caps. Are you able to run an audio probe coming off of pin 7 of the 555? Mines modded, but here's a quick runthrough of my most recent build just showing the range and interactivity of the controls, in case that helps at all

I'm assuming it's the same without the expression pedal? Could we get some clearer photos of the solder side? And, you've said this is the second you've built with the same issue- are any parts reused from the previous attempt?

You'll most likely have to upload it to YouTube first. Wiring lengths are kinda excessive, but look correct. Resistors looks fine. Which LDR are you using? And, just to be thorough- the backs of the pots under the board are insulated?

There's really not a whole lot to get wrong with this circuit, so we can definitely get this up n running Would a better shot of the bypass wiring, and short video demonstration (focusing on sweeping the Sens, Threshold and Mix pots) be possible?

Your timing chip is wrong- NE555 won't work. I've had success with LM555, LMC555, TLC555, and ICM7555 Have you verified that the LED responds to picking dynamics? Also, the mix pot is wired what I'd consider backward- you get the full oscillator mix when zeroed out

Loup's wounds are healing nicely, but now he starting to spray everywhere (including right next to my head while I was sleeping 🤮).... Have to wait til the 7th to get him snipped He's a lovely lad, otherwise though. Incredibly polite, but doesn't know how to play

Shit, that was easy. OpenCamera is working exactly how the Google camera used to! Thank you

I'm in need of a new way to record demos. Whatever Google did with the last pixel update seems to have fucked me out of being able to use either of my interfaces as wired mics with my phone. Up until now, I've just been using the native Google camera app and either the Joyo Momix or Topping...

Decided to cave in and finally build a Rat

Not mail exactly, but a friend just delivered these to me- 80s Small Stone. Battery was leaking inside it, surprisingly didn't damage anything other than the snap, so I cut it out. Switches need cleaned / replaced, but, except for the bypass, it sounds amazing And, an 82 FX50 and first run...

Got this stinker to the vet today. He's in chipped, and un-neutered. Tested negative for FIV and leukemia, but still waiting on blood work for any other issues. His wounds (not gonna post em, they're nasty n sad) came back from bacteria under the skin, so they gave him an antibiotic injection...