Search results

Hmm, I had to look that one up. Google says: “The Bombyx mori technique refers to sericulture and rearing practices for the domesticated silkmoth, centered around optimizing life-cycle management, artificial diet preparation, and non-destructive harvesting or breeding” I really hope I don’t...

Reflowed Q3 and was able to fix it. Initially I biased everything to 4.5 V but that gave to much clean headroom so I added some variation which worked. I’ll do a full write up after I have a chance to play around with it.

After a straight forward build I can't seem to get the Lilliput Q3 D anywhere near 4.5-5V. Q1; Q1 is 5.1V, Q2 is 4.5V, and Q3 is 8.3V at the minimum on the trimmer. The S and G legs read 0V. There is continuity between the SMD and the through-hole pads. I used smd J201's from Tayda. Plugged in...

File received and looks like it lines up perfectly will the drill template. Thanks!

I’m having trouble getting the EffectsLayout Lilliput drill template to line up in Affinity Designer. I’m using the Coppolo Affinity template but the Lilliput drill template at 100% is slightly bigger than the design area. Is there a way to get them to line up automatically? TIA

Not sure how missed that, thanks!

Hi all. I am interested in building a treble booster, but don't know to much about them. The Analogman Beano Booster is widely praised but I have seen a DIY version out there. In fact there doesn't look like to many PCB's exist for what seems a relatively simple circuit. The one option I have...

My bottle just says Denatured alcohol. I guess I'll have to get some of the good stuff😜

I boxed it up and tested and it definitely sounds better there is still a persistent SHHH. I discovered that if I turn the drive all the way down it goes away, and I don't hear it until around 8 or 9 o'clock. Here are some updated pictures:

After reflowing a few more joints and fixing one potential bridge I heard a noticeable improvement. I just did another pass with the ISO and am giving it some time to fully dry before testing it again. I think this is an inherently noisy circuit, so I don't expect it to be silent, but want to...

Don't have one yet, but am planning to get parts to build one with my next order.

Hi all. I got this Fuzzy Fox built but all I'm getting is a loud static when engaged. I tried reflowing so joints, but so far it didn't help. I usually start by measuring voltages on the ICs but not sure how to go about debugging this one. I already tried cleaning the flux with ISO and a...

Yes I boxed it. The noise is like a loud SHHHH, that is persistent.

Thanks, I had already tried cleaning the flux with some iso and a toothbrush, but that seemed to spread it out more. I'll do a second round and see if I can clean it better. The transistors I got directly from @Robert: https://www.pedalpcb.com/product/2n3565/

Moved to troubleshooting forum. https://forum.pedalpcb.com/threads/fuzzy-fox-loud-static-when-engaged-moved-from-the-toolbox.28151/

Thanks, I’ll take a look at that. I was thinking I could also use Gemini to verify the part list against the schematic and a picture of the board.

Wow you're right! The schematic and screen both say 2M but parts list says 2M2. I should have caught that but sounds like it went matter much.

1) Expresso Expression Multiplexer - I've had so much fun with this. I can no switch my expression pedal between my Red Panda Tensor (Tape stop), Keeley Halo (mix), and HX One. 2) Low Tide Modulator - This sound so good. I had previously tried to build a mini which I never could get working...

Happy holidays all! I'm putting together my simple jfet buffer and I ordered 2M2 1/8 W resistors for R1 and R2 based on the build doc but the PCB has 2M printed on it. I know the answer is usually go with what is printed on the board but I thought maybe 2M2 wouldn't fit on board. So can I use...

I have a strat with a channel bound neck that is outstanding. Super comfortable to play and beautiful to boot. They sell them as separate but are pricey.