Search results

I will be able to do that in an hour or two .Etched it myself so it’s a bit ugly.

Yes thats how I wired it and I used a J113. Whats got confused is 1 - both trimmers (the bias and volume) raise and lower the volume and 2- whether it’s in bypass or turned on the 2 trimmers still adjust the volume of the rest of my pedal chain. That just seems really odd behaviour to me...

So I made a board from the schematic above and after fixing a sstuuppidd mistake (diode in backwards) I now have 8.77 v on the jfet and can only bias it down to around 8.45v I\ve wired it in where the organ donor output goes to booster input and booster output to organ donor output.. Oddly...

Just a shout out to PedalPCB for another fine fun pedal with lots of knew sounds to experiment with The pedal? The Organ Donor. After finding faulty wiring on the 3PDT it fired right up. 2nd time soldering the FV-1 to a board and no problems. I just make sure I file my soldering tip...

Having a massive brain fart happening here. Some reason I can't figure this ultra simple wiring. I've omitted the battery snap and thats the only change. when powered up I get no LED's to light up. I think I know where I messed up by running the D.C. ground to the input jack ring lug kinda like...

temol thank you for the response. Since it's for my pedals and I'd like to squeeze as many 9v jacks as I can into the box I naively assumed about 1 amp would handle alot but my salvaged transformer from a Fender Frontman amp is 1/2 an amp from the (frontmans scheme where I got that from) AND I...

Thank You very much

Thank you for the reply I know Google is my friend but Could you tell me how to get the voltage down to 9 volts , possibly?

Ok so I'm gonna build another power supply (its been years since I built my last one. A power supply for my 9volt pedals only. Finding info on the web is tedious and sometimes confusing so my question is ... 1 - I have an 18v (on the secondaries) transformer most directions to build a power...

Cruising the internet I came across an interesting web site with a shit load of service/repair notes on a shit load of their pedals along with schematics and board layouts. Maybe most of you have been to it but for the one guy who's looking look no further than here...

It's ok Barry your forgiven

is it a screamer? Sustain for days? just built my first Rat. Blows me away I leave the Rat to be like my 200th build..

I' have'nt tried anything with tubes ......yet I'm gonna have to actually try one or 2 first hand to see if they'll be worth building them for myself sounds like you got an awesome chain going there. It's crazy the amount of pedals out there being made and to be made .Every week or so I come...

Sounds like killer combo And a couple more builds for mee

I've been eyeballing some of guyatone circuits and actually that Distortion H in particular because of the 5 band EQ. I've got a couple of BE-OD's but mine don't seem to stack very well The Abasi Pathos is a killer pedal but I wasn't impressed with the the Velvet Fuzz (maybe mines got some issues)

To be honest Ive never heard of this and this is why I dig this forum and thread I guess tracing that out yourself would be a huge undertaking and another skill Ive yet to try myself. No I take that back I did try the Openhaus from a picture of an original and then realized it was a 2 sided...

Very cool thank it just so happens that Ive been working on doing my own layouts from schematics but I got a ways to go working on low parts count ones to work up to bigger ones definitely going into my archive thanks again Probably be some time before I get to it since my to do next list is...

I really love it especially with the killer Altec Lansing speaker Im using Ive had it for a few years now but havent figured out how to use the Record out jack also the built in fx are really nice all except the distortion which I think sucks picked the head up dirt cheap. Its a heavy...

Hmmm sounds like a good combo and 2 new builds in my future Thank you

Since the Tight metal was my 1st high gain build Ive really loved the pedal so much I built another both built several years ago when my skills were shoddy and I was just happy I could play through it. It is an awesome circuit but miy 1st one built with the FX loops I used the wrong jacks and...