Search results

  1. Coda

    Harmonic Percolator (with some mods)

    Still hard from this one…
  2. Coda

    SimiSmile Fuzz no sound

    Also, if possible, can you please post a photo of the soldered side of the footswitch?…
  3. Coda

    SimiSmile Fuzz no sound

    First things first: go back and touch up all solder joints. Just touch the tip of the iron to the joint for 3 seconds… If still no joy we can move on to step 2 and 3…
  4. Coda

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Well, I read for the info, not the personality. You would want to try and match the measurements of Q2 and 3 in a Ge Tonebender MKII: 70-ish hfe for Q1, and 120-ish for Q2. You don’t want it too leaky, but the stuff you posted in the OP should work. Some of those transistors would work great in...
  5. Coda

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Yea, that’s a voltage inverter. The OG was Ge/PnP. To run that circuit with most power supplies you have to flip the voltage… Check this out: https://www.diystompboxes.com/smfforum/index.php?topic=120704.0
  6. Coda

    In the context of Fuzz Factory, how much leak is too much for the AC128? Values inside…

    Fuzz Factory has more in common with a Tone Bender MKII than a Fuzz Face…
  7. Coda

    Harmonic Percolator (with some mods)

    Working on an Albini tribute Percolator and this thread just saved me a fair bit of leg work. Now I can go and build something. @fig would approve…
  8. Coda

    Breadboarding A Fuzzy Fox - Spectacular Failure!

    You should be using the middle lug and one of the outer ones. The third one is unconnected…
  9. Coda

    Breadboarding A Fuzzy Fox - Spectacular Failure!

    From what I glanced over, nothing popped out. You’re really the only one that will be able to tell for sure, so we’ll have to help you figure it out. https://forum.pedalpcb.com/threads/troubleshooting-101.9028/ There is a lot at the above link. As for the probe, you can definitely follow the...
  10. Coda

    Breadboarding A Fuzzy Fox - Spectacular Failure!

    Ok, that’s as it should be. Time for a probe. I usually use my output jumper and just go back and trace the signal…
  11. Coda

    Breadboarding A Fuzzy Fox - Spectacular Failure!

    Are D1 and 4 backwards?…
  12. Coda

    Jhf1 schematic question

    Seconded. Except BigMonk didn’t tell me. Why didn’t he tell me?…does he not like me?…all I said was “eww, white socks”…
  13. Coda

    New fiber laser is super fast

    “Fiber laser” sounds like something a Proctologists office has…
  14. Coda

    Foxx tone Machine pedalpcb d9b ok?

    If you like to live life on the edge, then yes…
  15. Coda

    What is your favorite "Big Muff" circuit, and why?

    I’m chaaging mine: the only BMP I keep on the board is my big box NYC, stock…
  16. Coda

    Rat Circuit Recommendation?

    TL071, not TL072…
  17. Coda

    Rat Circuit Recommendation?

    Go with the standard. I’m sure someone can hook you up with a 308, but I recommend socketing the IC and trying a few out. TL072 sounds pretty good in a Rat…
  18. Coda

    Tube Amp recommendations

    The folks at Texas Instruments tell me it’s the future…
  19. Coda

    Tube Amp recommendations

    JC-22…
  20. Coda

    Thumb Sucker

Back
Top