Search results

Synth sound is gone and the pedal seems to be working correctly. I had a 2.2m resistor in r100. It should have only been a 100r.

Ive repalced all diodes, and reflowed every connection. It still has the synth sound after R1. Ive just ordered some 1044's from a reliable supplier. I'll report back once those have arrived.

Tayda, i'll order from another supplier. Cheers!

Looks like i used 4148's in that location, but i replaced them anyway. I also replaced the 6v2 with a different 6v2 zener (different suppliers). Still no change.

I jsut noticed the bom that was released has 2 1n4148's. i havent used them in this build. Instead i ordered the zener diodes that had the right volatages on the screen print. Could that be the issue. I cant seem to work out where the 4148'swould go. bom...

Having issues with my ceteus build. I forgot to put a dust cover on the treble pot (B250k) and think i may have shorted something. All i get is a synth type sound (sample below). Ive replaced d1,d2 and c104 and have also replaced all ic's. Those diodes were directly under the uncovered pot I...

Sorry if this has been asked and answered (i have looked on the forum) but have the drill templates for the Victory pedals been posted? Im looking for the Bobby, Cetus and Doxie. Cheers!

I searched the forum for answers to my question and came across these posts. Thought i'd quote them here for any future readers. There are reports of the ke-10720 and the gg5516 both working. I plan to socket and try both out. From the data sheets of both ldr's ke-10720 Photo Resistance (10...

Would either of these ldr's be ok to use for the sproing deluxe? https://www.taydaelectronics.com/photo-conductive-cell-resistor-ldr-540nm-radial.html or this https://www.pedalpcb.com/datasheet/GL55_DATASHEET.pdf or should i wait until these turn up (currently in transit)...

Working properly now. I didnt have the 3rd pin on the age pot soldered, easy fix!

That clip has the age set full CCW. Looks like ive messed something up. Thanks for the replys!

Just finished a hydra build. Everything works as expected, just the repeats are very dark, is this normal? I wasnt expecting digital type repeats but its darker than any of my analog delays. I actually love the sound of it currently, but just checking if i messed up somewhere. Cheers!

Magnetron has to be my fav and although im not that into modulation im really liking the Pendulum. Hasnt left my board Tips: cheap ebay secateurs are very handy with wiring, its also great they can lock together if needed. Spare pot condoms and the extra washers (from tayda) that fit the 6mm...

I think youve spotted the problem, thanks! I'll swap those out and report back

Thats a good description of whats happening, and yes i have swapped all ic's including the 2399.

Im having an issue with low volume on this build. Delay and modulation work, however the repeats are not as pronounced my first magnetron. All knobs seems to effect the signal as they should as does the internal trimmer. Ive reflowed all connections, i also replaced the internal trimmer. And...

No, but I have since built it again and had no issues second time around. I do plan to look over the pcb again though. Having a working one will make troubleshooting a little easier. I'll update this thread if I get it working.

USPS suspended shipping to Aus a few months back (it's still in place now). There are other postage options available from the USA to Aus but as you seen they are quite expensive. I've put a hold on order parts until normal shipping resumes. If you've be not looked diyguitarpedals.com.au give...

Can it fit: yes Will it look sloppy: yes Will any anyone other than you know: no I've done similar things on a few builds. Just try not to have the cap body touching anything else and your golden.

Awesome Great, thanks!