Search results

it was working it was working..i d like to change the hole drill of the jack ...i remounted it and it felt down on the ground (took a hit) then it didnt work anymore

hi okay...for testing the diode i ve only got a basic multimeter to test like the one i posted D100 158 D1 252 D2 247 D3 570 D4 570 D5 570 D6 573 i dont know what is measured with this result but here are the numbers i read are these values correct for you ? when i built it on the...

okay thanks dude for your help to define the term demand and when i should use it 😉 for the pics, i posted a dropbox video the first time i assemblied and soldered this pedal and it was working okay i will change the diodes

okay thank you for the vocabulary precision 😉 i didnt want to seem rude. so if i well understand music6000 just came to proofread the vocabularity issues but didnt give some electronic advises ..hahahaha

i tried to connect the gate of Q3 at the two leads of the R19 but nothing changes.. as i asked.. : do you think that the germanium diodes (or another components ) could have been damaged with a hit bacause the pedal fell to the ground i replaced the IC6 IC7 and the three Q1 Q2 Q3 for the...

demand does not mean " ask" ? is it rude ?

that's what i tried to do but i failed so that s why i asked help here and demanded to someone who has built and got this circuit to show me where i have to cnnect the pin2 of the Q3..i thought it should have been easy to give me the exact location !!

yes that s exactly what i demanded by this post where i have to connect the pin2 of the Q3

you think that i have to connect both to the R20 and R19 ?

yep that 's what i was thinking ..i tried the blue connection and the green one but no good result

Hello I have problem with the PCB and the pin2 (the gate) on the Q3 I lost the soldering connection I uploaded on my dropbox a video to show the problem here is the link https://www.dropbox.com/s/i7yxhjnf78myuqk/20230628_215748.mp4?dl=0...

yep exacltly as it's not working (like you can figure out with the dropbox video) i thought it was the Q1 Q2 Q3 ..i replace the IC6 and IC27. but i damaged and screwed a pad because i tried to remove the Q3 and i lost the connection circuit on the pin2 of the Q3 so i d like to know where...

Hello I have problem with the PCB and the pin2 (the gate) on the Q3 I lost the soldering connection I tried as marked on the jpg to solder to the R20 and the R19 (blue and orange threads) but nothing changed and it still doesn’t work Can someone tell me please where the 3 pin are linked...

As demanded on the jpg "ocelot Q3pin2" can you show me where i have to solder the pin 2 of the Q3 on which component ? by advance, thank you

Hello the team I have problem with the PCB and the pin2 (the gate) on the Q3 I lost the soldering connection I tried as marked on the jpg to solder to the R20 and the R19 (blue and orange threads) but nothing changed and it still doesn’t work Can you tell me please where the 3 pin are linked...

Hello I have problem with the PCB and the pin2 (the gate) on the Q3 I lost the soldering connection I tried as marked on the jpg to solder to the R20 and the R19 (blue and orange threads) but nothing changed and it still doesn’t work Can you tell me please where the 3 pin are linked...

finally i bought the TQ2-L-5V and it has been working perfectly since i put the panasonic relay

hello here is my pics of the relay i wired and that is working perfectly

hello today i put the true panasonic relay on this relay module and i have to say that everything is all right it's working perfectly thank for your attention regards

okay thank you for these rapid responses !! i m happy to read this because i tried fisrt with a non panasonic and it didnt work so i m gonna buy a real panasonic relay