Search results

I suspect many fine audio circuits were created because the wife was about to kill them. 🤣

I was able to use the same tubes. I got lucky.

Big thank you to Nathan for sending me another set of tube daughter boards for free. He didn’t have to do that and I truly appreciate it. Here’s the new circuit after surgery....

Thank you Nathan. I was able to salvage both main boards, but the daughter board sadly didn’t make it. 🏥

Making some headway.

Thank you for this idea. I’m going to need my Hakko FR-301 for this.

I probably ruined all my 12ax7’s as well.

Damn it. This is not going to be easy to fix. Thanks for your input.

That is the orientation in the build doc pictures. I assumed it was correct.

Hi all, SushiBox Fx updated Black Eye version. Built two and they both do the same thing: Build: SushiBox Fx Black Eye twin 12a_7 overdrive. https://drive.google.com/file/d/1AZtIS7IiQWQchlRfPitWsgdChZKbrSuD/view Mods: none Clean bypass: No problem, sounds fine Activated switch: Bupkis...

If all ten caps are reading in this range, It’s not the caps. Do other electrolytic caps you have also read wrong? Make sure the black and red leads are fully pushed into the Mastech.

Fantastic build skillz. Always drool over the gut shots. This looks amazing.

Wow. That looks fantastic. It’s nice to know your first build looks better than my 50th build. It’s ok. I’ll show myself out.

It looks just like a Telefunken U47. 😁

The outside looks fantastic, but the inside is truly inspiring. Awesome work.

All that off board wiring. Sweet job. 😅

I’ll throw my hat in the ring. I just finished building my Black Eye. I’ve been building for about ten years with a few tube projects thrown in there, so take that for what it’s worth. First, the thing sounds killer when you keep the gain and output under 50%. Above 50% for either the gain or...

Are you using a 1/4 watt 33ohm resistor?

I use both the LMS “Heart” switch and the GORVA switch for all my builds. The GORVA switch has a smoother feel and easier click IMO.

My first 4 pedals I built didn’t work. I was meticulous just like you described. I would build the circuit and test it before I boxed it. I posted a troubleshooting thread on another board. It turns out that since I had the circuit face down, I was plugging my guitar into the output jack and...