Search results

As if this wasn’t a dumb question already, but I’ve added a Simple Clean blend to the Octave pedal so that when the switch is engaged for it, the person can blend it into the mix. I’ve tried send/return In/out with octave effect but once either the Volume on the blend or Octacve is at 0, I get...

WORKS LIKE A CHARM

Im about to wire this up now and i shall share the results soon!

I was experimenting on this for a friend and the goal was to make a 6 band eq that could have this Octave be sent first in the chain via toggle switch. I tried a bunch of different routing and unable to find any diagrams online. Im also not entirely sure i need to be using a dpdt switch to...

So make the cuts THEN flip the image and place the components in their corresponding spots?

Gonna be giving this a go as soon as Im off work! Thank you very much, guys!

Fuck I guess i need to start over and reverse the components???

this could be the case as well, but i was sure i place my components on the side without copper traces

BIG SAME ON THIS ONE

Gotcha, i have done this a couple of times so far and the result has been the same. After hitting it with the probe, i start to loose signal after the first cut on the first row.

This was my first attempt with vero and im not too disappointed in the turnout but my buffer only produces little output when engaged.

It looks correct but I guess Im still a little lost as to checking the volts of the IC

CDIL BC108 from GuitarPCB

I haven’t checked the voltages yest, but I get sound from the legs I need. All but one sound farty/choked. What voltages should I be looking for?

I do not have them socketed but it could be the case that I may need to swap the legs

This circuit has been around my place for a minute and it seems after probing im getting a very fart like/chaked sound on one of the pins to the first IC on forward before I get no output.

I have probed this thing a bunch and still cannot find the source of my issue. When engaged and probed, the output jack produces nothing.

Did both of these and either way will lead to a satisfying result!

Sorry, juust got back to this. The extra two wires are send and return. This is also the past circuit ive made that i had mentioned placing wires in the wrong postions

So I wouldn’t need the IN and OUT on the SFB or vice versa? 🧐