Accidentally bought 1590B enclosures instead of 125B...

ragamuffin

ragamuffin

New member
So I ordered the bulk of my components for three pedal builds from Tayda and just realized that I ordered three 1590B enclosures instead of 125B. The build documents (Titania2, Crunch Captain Deluxe, Simulcast) all call for 125b, but it looks like I could maybe put the Titania2 in a 1590B. Is it possible to do top jacks on a 1590B? I guess this means I need to buy at least two 125B enclosures...
 
There are a few threads here of people measuring for top mounted jacks on a 1590b. If I remember correctly, Madbean also has some drill templates.

Also, there are some PPCB boards that you can squeeze into a 1590b. Some of them you'll need to offboard wire the pots.
 
Measure out a piece of cardboard that's the TOP of a 1590B, a cereal-box is good;

then plunk down your PCBs on the cardboard, if they fit the cardboard they should fit the 1590B enclosure because the sides flare outwards a couple millimetres from the top to the bottom where the lid is.

IF the PCB fits, then figure out the jacks, footswitch spacing/sizing — 'cause even if the PCB fits, the number of knobs/switches and their orientation the PCB may mean 1590B is still a no-go.
 
MichaelW

Thread '1590B Top Mounted Jacks'

@benny_profane

There's a couple of old threads where this was done up in a lot nicer template but this is how I do my 1590B top mount jacks.

Couple of considerations:

1) I've only used these measurements for Switchcraft mono jacks and Rean Neutrik mono jacks. They "should" work with other types but these are the only jacks I used for 1590B and 1590BB enclosures. Also, I've only used the small Lumberg style mini DC jacks (although I use an off brand from Amazon, not real Lumbergs)

2) Generally, MOST of the boards that measure 1.95" in width (or 2') will work with this method...
  • Like
  • Love
 
It's possible to do top jacks with 1590b but it only works with certain kinds of jacks and you have to be super accurate. The 125b is much more forgiving. Since you have to order some anyway, I would just do all 3 as 125b's
 
Robert said:
MichaelW

Thread '1590B Top Mounted Jacks'

@benny_profane

There's a couple of old threads where this was done up in a lot nicer template but this is how I do my 1590B top mount jacks.

Couple of considerations:

1) I've only used these measurements for Switchcraft mono jacks and Rean Neutrik mono jacks. They "should" work with other types but these are the only jacks I used for 1590B and 1590BB enclosures. Also, I've only used the small Lumberg style mini DC jacks (although I use an off brand from Amazon, not real Lumbergs)

2) Generally, MOST of the boards that measure 1.95" in width (or 2') will work with this method...
  • Like
  • Love
Click to expand...
Honestly that thread should be pinned/stickied given how often it comes up
 
Got my 125Bs drilled and painted, Simulcast almost done (waiting on an LED that's coming in the mail), mostly populated the Titania2 but realized that I am short a single 1nF cap... Dangit.

What's the cheapest place to get a couple of caps? I checked my inventory for the Crunch Captain Deluxe and I'm not missing any other components.

IMG_2481.jpg
 
ragamuffin said:
Got my 125Bs drilled and painted, Simulcast almost done (waiting on an LED that's coming in the mail), mostly populated the Titania2 but realized that I am short a single 1nF cap... Dangit.

What's the cheapest place to get a couple of caps? I checked my inventory for the Crunch Captain Deluxe and I'm not missing any other components.

View attachment 97737
Click to expand...
Don't you have some salvaged pcbs full of through hole components laying around somewhere? :)
 
You must log in or register to reply here.
Back
Top