Aion FX Metal Zone in Stereo?

[Rhinodo99]

Using two of their PCB boards, how would I wire this thing so it would be in stereo?

 

[jwin615]

Using two of their PCB boards, how would I wire this thing so it would be in stereo?

Need dual gang pots all around
Lugs 1-3 to one board, lugs 4-6 to the other.
If using TRS jacks, tip to one input, ring to the other input. Same for outputs.
Probably want to match any caps in the signal path as close as possible.
Sourcing 5% or better pots wouldnt be a bad idea.
Matching components as close as possible is going to be key to keeping one from sounding different from the other.
If using a footswitch, I'd use 2x relay bypass boards.

 

[Rhinodo99]

That’s what I was looking for. Thanks!

 

[Bucksears]

Did AionFX do a Metal Zone?
I can't seem to find it on their site.

 

[Giorfida]

Did AionFX do a Metal Zone?
I can't seem to find it on their site.

I can’t find one either

 

[Rhinodo99]

Did AionFX do a Metal Zone?
I can't seem to find it on their site.

No. It’s the obsidian, which is the boss MZ-2 Metalizer. I misspoke when I said metal zone.

 

[Paradox916]

You might be better off building 2 metalizers and a splitter with a phase switch. This might avoid later troubleshooting (I don’t know your skill level or experience. ) and if it doesn’t sound how you hope you could possibly sell one or gift it to a friend,

 

[Erik S]

better off building 2 metalizers

Plus, that way you can run em in series!

 

[Aentons]

...or step up your game and do a stereo Tight Metal