damianvila
Well-known member
Since I have a few PCBs from previous research lying around, I was thinking about giving them away to people interested in trying them, but I don’t see many people in this hobby using SMD components, so I thought of asking first.
I have two different circuits based on the same effects: a Crackle Not Ok (a version of Super Hard On) and an Electra with a few modifications. These are almost the same circuits I’m using for my actual project (though I changed the CNO for the AMZ booster, that’s very similar).
One effect is the two effects activated simultaneously, but with the possibility of changing the order using a 4PDT footswitch. This one is called “Octopapa” (after a huge octopus Son Goku encounters in DragonBall). It’s intended for a 1590BB enclosure, and it consists of two PCBs.
The other effects is just the booster first with the distortion after it, in a 1590B enclosure. This one is called Boostgochi (like Tamagochi), and it’s a decent effort, actually.
All use mostly 1206 footprint SMD components, so they’re easily soldered by hand.
I also have a few 3PDT breakout boards, but the CLR footprint is also for a 1206 resistor, and the led is offboard. The holes of these ones are round (it was before I learned to do long holes with EAGLE).
So, if any of you is interested, let me know, and I can give you more info, to see if you may want anything sent your way.
Cheers!
I have two different circuits based on the same effects: a Crackle Not Ok (a version of Super Hard On) and an Electra with a few modifications. These are almost the same circuits I’m using for my actual project (though I changed the CNO for the AMZ booster, that’s very similar).
One effect is the two effects activated simultaneously, but with the possibility of changing the order using a 4PDT footswitch. This one is called “Octopapa” (after a huge octopus Son Goku encounters in DragonBall). It’s intended for a 1590BB enclosure, and it consists of two PCBs.
The other effects is just the booster first with the distortion after it, in a 1590B enclosure. This one is called Boostgochi (like Tamagochi), and it’s a decent effort, actually.
All use mostly 1206 footprint SMD components, so they’re easily soldered by hand.
I also have a few 3PDT breakout boards, but the CLR footprint is also for a 1206 resistor, and the led is offboard. The holes of these ones are round (it was before I learned to do long holes with EAGLE).
So, if any of you is interested, let me know, and I can give you more info, to see if you may want anything sent your way.
Cheers!
