Brown Betty PCB Thickness

[Roanacho]

Just wondering if the thickness of the subject PCB is thinner than average. I just received one that was about 1/2 as thick as the typical PCB, just making sure this is normal.

 

[waarp]

The Additional info tab shows the thickness as 1.6mm which is pretty normal. Have you measured it with some calipers?

 

[Roanacho]

I didn’t even think to look for a spec under additional information but I just measured the PCB in question and it measures about .75 millimeters. The others included in the same shipment all measure 1.62 mm

 

[Robert]

The most recent batch of Brown Betty and Super 64 PCBs were 1.0mm instead of the usual 1.6mm.

It was a goof with the fabricator but it doesn't affect functionality at all.

 

[Guilherme Collateral]

The most recent batch of Brown Betty and Super 64 PCBs were 1.0mm instead of the usual 1.6mm.

It was a goof with the fabricator but it doesn't affect functionality at all.

And I must add that it costs the same to manufacturer both

 

[Roanacho]

The most recent batch of Brown Betty and Super 64 PCBs were 1.0mm instead of the usual 1.6mm.

It was a goof with the fabricator but it doesn't affect functionality at all.

Thanks for the reply, appreciate it.