apc42069
Well-known member
greetings pedalpcb braintrust-
I just finished this build, and man I got some problemos...
When I first tested the circuit, it worked perfectly with the toggle UP. it was completely dead with the toggle DOWN.
Assuming an overflowed lug / grounding issue, I desoldered the toggle & replaced it.
Now, I have massively attenuated output & no effect present (in both UP and DOWN positions)
the LED is on. Bypass works as should.
any ideas?
*i realize this pic sucks. all the other ones won't upload, despite my efforts to size them down.
I just finished this build, and man I got some problemos...
When I first tested the circuit, it worked perfectly with the toggle UP. it was completely dead with the toggle DOWN.
Assuming an overflowed lug / grounding issue, I desoldered the toggle & replaced it.
Now, I have massively attenuated output & no effect present (in both UP and DOWN positions)
the LED is on. Bypass works as should.
any ideas?
*i realize this pic sucks. all the other ones won't upload, despite my efforts to size them down.