I recently built a Depot fuzz, but am having some issues. When I first built it the effect was almost discernible from my dry signal, I checked my values, resoldered everything (especially the transistors) and still the issue persisted. After reading about a wrong screen printed value on R11 I decided to swap the 1M out for a 47k resistor and it now has a nice little bit of breakup with all knobs maxed, but still nothing in the way it should be.
I did notice it asks for P2N2222A and I used PN2222A. When I looked it up I found they’re equivalents. But I thought it was worth noting
Here’s a link to an audio clip as well
Any advice is much appreciated, and let me know what other information I can provide. Thank you for reading this
I did notice it asks for P2N2222A and I used PN2222A. When I looked it up I found they’re equivalents. But I thought it was worth noting
Here’s a link to an audio clip as well
Any advice is much appreciated, and let me know what other information I can provide. Thank you for reading this