Thanks! This is the third time I've built the Cataclysm pedal - it's a good one. I used a 1590XX enclosure - with the rigid PCB-mounted pots, the two boards wouldn't fit in a 1590BB - the PCBs would have been too close to the switches.
I love the sound of these two pedals, but if you're looking for a "traditional" reverb with delay, I don't think the Spirit Box is an ideal match. It has a pre-delay before the reverb kicks in. It's adjustable, but even at the shortest setting, when fed with the delay pedal, you kind of get a "double-bounce" effect with the two delays. Something like the Wampler Faux Spring Reverb circuit would probably have been a better match in this dual pedal, as that pedal just sounds like a great old spring reverb. Or, a pedal order switch might also give interesting results, where you could feed the reverb into the delay instead. Here's some noodling...
Yes, I used a inkjet waterslide clear decal paper. I hate that part of the pedal-building process - making sure no bubbles, or trying to get clear lacquer coats without dimples, crackling, etc.
The parts totaled around $100, which isn't too bad for a 2-in-1 pedal, but definitely more than the $30 or so that I spend on most pedals I build.