I'm getting no signal from my circuit, just noise when it's on. I've troubleshot it to the best of my ability, every trace I can find gets a beep when I test for continuity. From the other thread with a similar issue, it seems like my LM386s could be the problem, but I'm not sure how to check them. Hoping that's not the case since I didn't have the foresight to use sockets.
![1000002338.jpg 1000002338.jpg](https://forum.pedalpcb.com/data/attachments/79/79561-1288d37cde1156de72a009b8fa0819ee.jpg)
![PXL_20240802_195141574.jpg PXL_20240802_195141574.jpg](https://forum.pedalpcb.com/data/attachments/79/79562-5688ca1ad850c2072bd75e5d7662aaed.jpg)
![PXL_20240802_195159068.jpg PXL_20240802_195159068.jpg](https://forum.pedalpcb.com/data/attachments/79/79563-6bd4a6bda2d31466cc9e732bf1412ac7.jpg)
![PXL_20240802_195613922.jpg PXL_20240802_195613922.jpg](https://forum.pedalpcb.com/data/attachments/79/79564-8d2d13017a0bab0b09d45925b879e6ee.jpg)