Ginormous CLR

[VanWhy]

I should know this but which 4K7 resistor is the CLR? I'm assuming its the first one but just want to make sure.

 

[steviejr92]

The first one for sure.

If you look at what the 2nd resistor is connected to, that's in the audio path of the circuit!

 

[Bricksnbeatles]

4k7 is a pretty standard sized CLR

The one on the left would make sense

 

[VanWhy]

Thanks for confirming @steviejr92 and @Bricksnbeatles !!!!!

 

[KR Sound]

I was looking for the really big resistor

 

[VanWhy]

So I'm using one of the prewired LED's. I jumpered the 4K7 CLR but the LED always stays ON. I can hit the footswitch and turn the pedal on and off but the LED still just stays lit. WTF?

Edit: I'm pretty sure its this one https://www.amplifiedparts.com/products/led-bezel-cup-shape-prewired-red-led

 

[Bricksnbeatles]

Check your footswitch wiring

 

[Laundryroom David]

So I'm using one of the prewired LED's. I jumpered the 4K7 CLR but the LED always stays ON. I can hit the footswitch and turn the pedal on and off but the LED still just stays lit. WTF?

Edit: I'm pretty sure its this one https://www.amplifiedparts.com/products/led-bezel-cup-shape-prewired-red-led

Share a pic of the board?

 

[VanWhy]

Share a pic of the board?

 

[VanWhy]

For the hell of it I cut the jumper and the LED did turn off so I soldered the jumper back together. That's why it looks like it does

 

[jimilee]

I’m gonna be the guy that says 2 x 4k7 resistors in parallel is 2k35. Does it matter? Nope, but it’s done now.