Currently working on build #12 . When testing I would get no sound with the pedal off or on.
To be honest I think I'm missing something obvious with the output jack. I'll ground an audio probe on the output jack and stick the probe onto the tip and I get no sound. I have confirmed that I have correctly soldered the tip and the ring. When putting the ground and probe directly onto the cable to my amp I will get a signal. However when I plug that same cable into the output jack I can't get the probe to get a signal through after grounding it on the ring tab and placing the probe on the tip tab.
Something odd that I'm noticing is that when I plug my amp input directly into the output jack the noise floor drops to zero. I have desoldered and replaced the jack with a new one but still no signal.
I'm assuming I'm missing something completely obvious here but I just can't seem to figure this one out.
https://mail.google.com/mail/u/0?ui...981&th=19f0137469e61fa5&view=att&zw&disp=safe
To be honest I think I'm missing something obvious with the output jack. I'll ground an audio probe on the output jack and stick the probe onto the tip and I get no sound. I have confirmed that I have correctly soldered the tip and the ring. When putting the ground and probe directly onto the cable to my amp I will get a signal. However when I plug that same cable into the output jack I can't get the probe to get a signal through after grounding it on the ring tab and placing the probe on the tip tab.
Something odd that I'm noticing is that when I plug my amp input directly into the output jack the noise floor drops to zero. I have desoldered and replaced the jack with a new one but still no signal.
I'm assuming I'm missing something completely obvious here but I just can't seem to figure this one out.
https://mail.google.com/mail/u/0?ui...981&th=19f0137469e61fa5&view=att&zw&disp=safe
