Instructions on assembling the 6 Band EQ?

[AngelRiot]

I ordered all the necessary parts but I do not know how to assemble it, will there be additional instructions? Thank you guys and have a great day.

 

[zgrav]

from this page:

6-band EQ

Would be be OK to blast one square hole in the center of the enclosure, instead of (a) waiting for the pre-drilled enclosures or (b) attempting to make the slits? Yep, if I had to do it over again this is what I would do. This might be the way Tayda ends up having to do it as well. The...

forum.pedalpcb.com

Just an added note (I'll add this to the build docs shortly as well)....

Assembly is much easier if you go in this order:

• Install faders onto the fader module
• Install all components onto the main module
• Solder pinheaders onto the fader module
• Mount fader module into the enclosure using hex spacers / screws
  6mm screws go through the face of the enclosure, 4mm screws go inside the enclosure
• Install main module onto pinheaders and solder in place
• Wire it up