Dan0h Well-known member Jun 4, 2022 #1 Title says it. Just want to make sure the parts list for the Low tide mini is the same as the regular low tide. And, didn’t realize the hunt I would be in for tracking down all the chips. Exciting times!
Title says it. Just want to make sure the parts list for the Low tide mini is the same as the regular low tide. And, didn’t realize the hunt I would be in for tracking down all the chips. Exciting times!
Big Monk Well-known member Jun 5, 2022 #3 I wouldn’t bet on that. With the stacked PCB, cap form factors are going to be different.
fig Village Idiot Jun 5, 2022 #4 HamishR said: As far I know it's the same but smaller. Click to expand... Happens every time.
M manfesto Well-known member Jun 5, 2022 #5 I think the 220uF on the big one is replaced by two 100uF on the mini (probably hard to get a short 220uF)
I think the 220uF on the big one is replaced by two 100uF on the mini (probably hard to get a short 220uF)
Dan0h Well-known member Jun 6, 2022 #6 manfesto said: I think the 220uF on the big one is replaced by two 100uF on the mini (probably hard to get a short 220uF) Click to expand... Thank you I will make sure to grab extra 100’s.
manfesto said: I think the 220uF on the big one is replaced by two 100uF on the mini (probably hard to get a short 220uF) Click to expand... Thank you I will make sure to grab extra 100’s.
Big Monk Well-known member Jun 6, 2022 #7 Dan0h said: Thank you I will make sure to grab extra 100’s. Click to expand... All the caps need to be 7 mm or less in height I believe so keep that in mind.
Dan0h said: Thank you I will make sure to grab extra 100’s. Click to expand... All the caps need to be 7 mm or less in height I believe so keep that in mind.
BLACK FRIDAY SALE!
