Minnow Voltages wacky?- need a second set of eyes

[DGWVI]

Pretty sure I've got a wrong resistor or two somewhere, but haven't tracked it down.
Only sub is a 220r in R20.

I get audio through, including LFO thumps, but is a heavily low passed signal, and definitely not working correctly

IC1

1. 0.03
2. 0
3. 0
4. -9
5. 0
6. 0
7. 0
8. 9.2

IC2

1. 0.04
2. 0
3. 0
4. -9.01
5. -4.49
6. -1.05
7. -6.6
8. 9.2

IC3

1. -7.58
2. -0.12
3. 0
4. 0
5. 0.2
6. -8.6
7. 0
8. -1.18
9. 0
10. 0
11. 8.7
12. 0
13. 0
14. 0
15. 0
16. -7.5

Q1

• D- 8.71
• S- 0.01
• G- 0.2

Q2

• E- 0
• B- 0
• C- -7.55

Q3

• E- 0.02
• B- 0.2
• C- -6.14

Q4

• D- 1.4
• S- 9.01
• G- 0.02

Q5

• D- 9.2
• S- 0.2
• G- 0.04

IC100

1. 9.2
2. 5.3
3. 0
4. -3.73
5. -9
6. 4.3
7. 5.8
8. 9.2
9. 

I've got the toggle replaced with a footswitch, verified continuity there, and it checks out.
I'll have to wait til tomorrow to run full continuity check or audio probe, but hoping someone catches something I didn't

 

[Feral Feline]

Resistors Nope.
As you noted only sub was 220Ω for R20.
All other resistors check out, visually.




Perhaps you inadvertently swapped the trimmers?

The 1458 below the B5k looks a little wonky, maybe try reseating that one.


Or...