Missing Build Docs / Schematics

[Robert]

Or maybe see the schematic?…

https://docs.pedalpcb.com/project/Schematic-WaypointFuzz.png

 

[KR3]

I'll get it posted ASAP. Is there anything specific you need to get you started?

@Robert any update on the Binaura build doc please? Would appreciate the schematic, BOM and a drill template please. Looking forward to building it.

 

[Giorfida]

@Robert just received the USB Pedal Power board and realized there is no doc (or at least BOM… pretty simple so a simple text list would be fine). Just trying to get a parts order together and want to avoid multiples (and get double dinged on shipping)

 

[Robert]

Yep, I'm working to get those (that and the Isolator) posted today.

The BOM is simple, I just have to finish up the drill template since you'll need appropriately sized hardware for mounting.

 

[Giorfida]

Yep, I'm working to get those (that and the Isolator) posted today.

The BOM is simple, I just have to finish up the drill template since you'll need appropriately sized hardware for mounting.

Thank you! Luckily I have most of that on hand thanks to the Protoboard build, and FV1 development board builds. Only thing I need is the DC converter.
I’m likely building mine in non-standard enclosure under my work table (where I already have a USB hub permanantly mounted).

 

[Robert]

Updated the BOM.

 

[Nic]

Yep, I'm working to get those (that and the Isolator) posted today.

The BOM is simple, I just have to finish up the drill template since you'll need appropriately sized hardware for mounting.

So, following that bom, the output would be 12V ? Using the IEB0105S09 would give me a 9V output for most pedals

 

[Robert]

The 12V output is regulated to 9V by the L7809.

 

[Nic]

Ok, thank you !
Is it the same for the 4 tap ?

The 12V output is regulated to 9V by the L7809.

 

[Robert]

You want the IEB0105S09 for the 4 Tap, I'll get that one posted shortly.

 

[Nic]

You want the IEB0105S09 for the 4 Tap, I'll get that one posted shortly.

So in the 4 tap, the regulator brings the voltage to a certain level (5V ?) and then converters are used to get a specific voltage and mA output on each tap? Or I am completely off ?

 

[Robert]

Yep, that's correct.

 

[AlphaMoose]

Any idea when we can get a schematic up for the Scabbard?

 

[Nic]

You want the IEB0105S09 for the 4 Tap, I'll get that one posted shortly.

So ... there are a few parts with the same spec. the XP Power IEB0105S09 at 3$ (in Canadian), the XP Power IE0509S at 8$ and the RECOM RO-0509S at 10$. any reason to pay the extra dollars or the 3$ one is a good long term choice.

 

[DeadAirMD]

Drill template for Two Tone Fuzz?

 

[KR3]

@Robert any update on the Binaura build doc please? Would appreciate the schematic, BOM and a drill template please. Looking forward to building it.

Hi @Robert any chance of getting these soon please? Can’t wait to have it on my pedalboard! Thanks!

 

[Robert]

Hi @Robert any chance of getting these soon please? Can’t wait to have it on my pedalboard! Thanks!

Schematic is here:

https://docs.pedalpcb.com/project/Schematic-Binaura.png

BOM is here:

Binaura Stereo FV-1

Binaura Stereo FV-1

forum.pedalpcb.com

Drill template is here:

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_Binaura.pdf

 

[KR3]

Schematic is here:

https://docs.pedalpcb.com/project/Schematic-Binaura.png

BOM is here:

Binaura Stereo FV-1

Binaura Stereo FV-1

forum.pedalpcb.com

Drill template is here:

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_Binaura.pdf

Thanks!

 

[Zanshin]

You want the IEB0105S09 for the 4 Tap, I'll get that one posted shortly.

For the 4 tap, in the pending build doc you list "L7805CV" which is a 5V voltage regulator, should it instead be "L7809CV" which is 9V?

 

[Robert]

For the 4 tap, in the pending build doc you list "L7805CV" which is a 5V voltage regulator, should it instead be "L7809CV" which is 9V?

The 5V regulator is correct. The DC/DC converters are 5V In / 9V Out.