SOLVED Muffin Fuzz Triangle No Works...

[Coda]

Just finished the Triangle Muff build and ran into that chestnut of an issue: no sound. I get a bypass signal, but nothing when I click the pedal on, other than a bit of static from the volume pot. I’ve gone over the board a few times and everything looks correct. I either missed something simple, or maybe my switch is faulty. Any ideas?

 

[Coda]

Is the R16 Ground pad damaged?
If so, just Jumper the piece of resistor lead from R16 Ground side to R13 Ground pad.

No, its fine. I reflowed the solder there and its fine.

 

[Coda]

Update: the correct resistors have been restored, and the muff lives! Still not perfect, but its getting there. I used a quartet of BC183C's and I'm not a fan. I'm going to swap them out for some 2N5088's I just got in. Thanks for all the help.

 

[Coda]

One more update: I swapped out the BC183's for the 2n5088's. Major difference. This fuzz is amazing. Tons of tones, and its really loud, which is good...