Muzzle rev 1.5 led issues

[paulharvey]

So the circuit seems to be working properly but the led stays green until a certain point of turning the threshold clockwise then it turns red. There is no change in its status as you introduce guitar signal. I assume it’s supposed to be red when the gate is engaged and green when it opens up. I’ve tried both common anode and common cathode led’s.

 

[Paradox916]

Can you post a gut shot of the pedal so we can take a look? That would be helpful for starters. This pedal can be a little tricky. That’s how I built mine green/open and red/closed.

 

[paulharvey]

Thanks for the reply. Here’s some gut shots

 

[Paradox916]

Thanks for the reply. Here’s some gut shotsView attachment 10273View attachment 10274

So the circuit seems to be working properly but the led stays green until a certain point of turning the threshold clockwise then it turns red. There is no change in its status as you introduce guitar signal. I assume it’s supposed to be red when the gate is engaged and green when it opens up. I’ve tried both common anode and common cathode led’s.

What jacks are you using?