paulbarrette
Active member
Hi
I have a pathogen build with a 3 pdt stomp with a mini pcb board
Pass thru works ok
Stomp engaged, no led, no output
Pcb + to mini pcb IN shows-9.29v
I suspect the 3pdt but it is unclear what the proper set up is. Not sure what to look for in the switch.
Attaching a pic
Appreciate any advice.
I have a pathogen build with a 3 pdt stomp with a mini pcb board
Pass thru works ok
Stomp engaged, no led, no output
Pcb + to mini pcb IN shows-9.29v
I suspect the 3pdt but it is unclear what the proper set up is. Not sure what to look for in the switch.
Attaching a pic
Appreciate any advice.