Robert
George Cloney
I'll get the complete build doc posted ASAP, still working through the backlog of orders from the weekend.
In the meantime, here's the parts list for the VIIB:
In the meantime, here's the parts list for the VIIB:
PedalPCB VIIB Parts List
- Thread starter Robert
- Start date
finebyfine
Well-known member
Thank you for posting this! Super excited to get my board.
On LED (DUAL CC) the CC refers to common cathode right?
On LED (DUAL CC) the CC refers to common cathode right?
finebyfine
Well-known member
One last question -- does it fit standard 125b 3-knob drill templates (other than kind of the LED)? I'm about to pull the trigger on a Tayda uv printing order and would looove to add one for this
Robert
George Cloney
Normally open, the standard momentary footswitch.
www.taydaelectronics.com
stompboxparts.com
stompboxparts.com
lovemyswitches.com
SPST Momentary Soft Touch Short Shaft Push Button Stomp Foots / Pedal Switch
SPST | Momentary | Soft Touch | Long Lasting | High Quality
www.taydaelectronics.com
SPST Footswitch PRO - Soft Touch - Square Top
Top Quality Parts for Guitar Effects Pedals and DIY Music Devices. Knobs, Pots, Switches, Kits, LEDs, Enclosures, Jacks, Wire, Resistors, Capacitors, Semiconductors
stompboxparts.com
SPST Footswitch - Soft Touch - Round Top
Top Quality Parts for Guitar Effects Pedals and DIY Music Devices. Knobs, Pots, Switches, Kits, LEDs, Enclosures, Jacks, Wire, Resistors, Capacitors, Semiconductors
stompboxparts.com
Pro-Grade SPST Momentary Foot Switch - Normally Open - Soft Touch - Solder Lug
Rely on the switch used by professional builders. Our “pro-grade” SPST momentary foot switch is normally open with solder lug terminals and whisper-soft click.
lovemyswitches.com
Would something like these work for the headers? Their height is 10.5mm if fully pushed together.
Robert
George Cloney
These are the ones I used:
www.taydaelectronics.com
www.taydaelectronics.com
www.taydaelectronics.com
The height isn't listed for the female portion, I'll have to measure one.
2 Pin 2.54mm Single Row Female Pin Header
GTK - Get It Fast - Same Day Shipping
www.taydaelectronics.com
4 Pin 2.54mm Single Row Female Pin Header
GTK - Get It Fast - Same Day Shipping
www.taydaelectronics.com
40 Pin 2.54mm Single Row Pin Header Strip
GTK - Get It Fast - Same Day Shipping
www.taydaelectronics.com
The height isn't listed for the female portion, I'll have to measure one.
Robert
George Cloney
Just measured mine, yep, 10.5mm (for the pair) is correct.
Stickman393
Well-known member
ICs are like teeth. Sometimes you gotta pull em out of a shitty pedal and slap em in one you think you'll like more.
Yup...exactly like teeth.
fig
Village Idiot
Ibanez flanger?
Stickman393
Well-known member
This is how I got a few original MN3005 for an analog delay build.. by pulling them out of a few DOD FX96 that were beat to hell.
That was only a few years ago. Remember when you could get crappy old pedals (even those with good chips in them) for like $35? Now even those are over $100 on reverb. Just another reason to keep building our own.
