SOLVED Plumes clone (Moonn Intensified Bird)- feedback

[Synchrony Pedalworks]

I got the Moonn Electronics version of the EDQ Plumes. I like it, but when using high gain, there is an enormous amount of feedback (squeal). Now, his description of the pedal describes it as an amped up Plumes, but the schematics are not terribly different from the Greengage version of PedalPCB.

I have changed the volume pot to an A5k and it is some better. I was going to lower the Gain pot, but thought I might as the gurus for some advice.

Any thoughts on the next move to tame the beast? Here is the schematic for your viewing pleasure.

Thanks!

 

[Synchrony Pedalworks]

Solved- changed volume to B5K and gain to B100k.

 

[Laundryroom David]

Solved- changed volume to B5K and gain to B100k.

Thank you for posting this. I have a board in queue (got as part of a surprise sampler) and will try this. I had a Plumes for about 2 days and hated it lol so hoping this interpretation of it is more useable.

 

[Synchrony Pedalworks]

Thank you for posting this. I have a board in queue (got as part of a surprise sampler) and will try this. I had a Plumes for about 2 days and hated it lol so hoping this interpretation of it is more useable.

I made the Plumes on perfboard and also disliked it. I like this one much more. The turbo setting with increased bass does the trick for me.