pcb rookie
Active member
I'm building the Powder Blue next and while picking the components, I noticed that the 120uF caps I have in stock are rated 16 volt. My basic circuit knowledge/understanding is that in this case it should be safe but I want to make certain that i'm reading this correctly...
There is no voltage charge pump in the circuit and the two 47k res (R101-R102) act as voltage divider so there should be no more than 4.5v on C102?
C100 would also be safe with 16v?
Panasonic Electrolytic 120uF 16V: https://www.digikey.ca/en/products/detail/panasonic-electronic-components/EEU-FS1C121/7381245
There is no voltage charge pump in the circuit and the two 47k res (R101-R102) act as voltage divider so there should be no more than 4.5v on C102?
C100 would also be safe with 16v?
Panasonic Electrolytic 120uF 16V: https://www.digikey.ca/en/products/detail/panasonic-electronic-components/EEU-FS1C121/7381245