Locrian99
Well-known member
It’s still rainy and wet up here in the pac nw. Thought we had an awesome weekend and it wasn’t too bad today.
Current system -
Rattle can primer, bring inside to bathroom with exhaust fan on. About an hour
First coat of color or another coat of primer based on need.
About an hour 2nd coat of color or first coat if needed 2nd coat of primer.
This point I let it cure for the night indoors and if I’m doing s decal do that or just clear coat if not. Problem I run into is 24-48 even past that cost I will get some bubbling. Ussually on the bottom where it meets the back plate but some times more. Do I just need to let it cure longer before the clear coat. It only ever shows up from the clear coat.
Current system -
Rattle can primer, bring inside to bathroom with exhaust fan on. About an hour
First coat of color or another coat of primer based on need.
About an hour 2nd coat of color or first coat if needed 2nd coat of primer.
This point I let it cure for the night indoors and if I’m doing s decal do that or just clear coat if not. Problem I run into is 24-48 even past that cost I will get some bubbling. Ussually on the bottom where it meets the back plate but some times more. Do I just need to let it cure longer before the clear coat. It only ever shows up from the clear coat.