Samurai overdrive

[Kibok]

Hi, on the chart for the samurai overdrive the C5 is a film capacitor. But on the pcb theirs a (-,+) as if it was an electolytic capacitor. what do i do?
thanks

 

[Robert]

The original used a 0.47uF electrolytic capacitor so the polarity is marked accordingly.

You can use a 470nF film, in fact I should probably update the footprint on the PCB since that's more common (and what is listed).

(470nF = 0.47uF)

 

[drew.spriggs]

Hi, on the chart for the samurai overdrive the C5 is a film capacitor. But on the pcb theirs a (-,+) as if it was an electolytic capacitor. what do i do?
thanks

If you use an electro, follow that. If you use film, ignore it as it's irrelevant.

Easy