Tayda Drill Guide Thermionic Deluxe

[Barry]

I'd love to see Tayda drill guides for some of these more complex layouts

 

[Barry]

So I took this on myself, what better way to learn Tayda's drill guide than jumping in the deep end, I ordered an enclosure and once I verify my dimensions I'll share it

 

[Harry Klippton]

Very commendable @Barry

 

[Barry]

Got it today everything lines up perfectly to the @PedalPCB drill guide , except my LED's are a mm or so closer to the footswitch, they could go another mm or 2 closer still if you wanted, I made my LED holes 5mm cause that's what I use and my footswitch and jack holes are intentionally small as I prefer to drill the powder coat out of them

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com

 

[Barry]

Actually on custom drill projects in the future I may leave all my holes 3mm and drill them the rest with my step bit and drill press, it'll cut way down on the powder coat that gets inside, most or all of which would then get drilled away

 

[Robert]

Actually on custom drill projects in the future I may leave all my holes 3mm and drill them the rest with my step bit and drill press

I thought about doing that with the 6-knob template so you could drill them to whatever size you needed (toggle, rotary, pot, etc) for a particular project.

 

[Barry]

I thought about doing that with the 6-knob template so you could drill them to whatever size you needed (toggle, rotary, pot, etc) for a particular project.

Please feel free to check my layout and tweak it as you see fit and add to the build docs

 

[Barry]

I thought about doing that with the 6-knob template so you could drill them to whatever size you needed (toggle, rotary, pot, etc) for a particular project.

I think it's great that they are now shareable and you can tweak them to suit your needs

 

[Crash102]

Got it today everything lines up perfectly to the @PedalPCB drill guide , except my LED's are a mm or so closer to the footswitch, they could go another mm or 2 closer still if you wanted, I made my LED holes 5mm cause that's what I use and my footswitch and jack holes are intentionally small as I prefer to drill the powder coat out of them

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com

Wanted to Say thanks for this. I put my order in at tayda without double checking having all my drill guides saved to my account. So I did a quick search of the forums and found this within 30 seconds. Love how posts more than a year old can continue to help people out