MichaelW Well-known member May 20, 2022 #1 Hey folks, Looking at the Twin Face schematic and it calls for 2x 20uf electrolytic caps. Looks like I should be able to get away with 22uf right? Just checking with the brain trust...... TIA!
Hey folks, Looking at the Twin Face schematic and it calls for 2x 20uf electrolytic caps. Looks like I should be able to get away with 22uf right? Just checking with the brain trust...... TIA!
fig Village Idiot May 20, 2022 #2 I'd say yep, but a second opinion wouldn't hurt.....unless it conflicts with mine that is
JamieJ Well-known member May 20, 2022 #3 Yep, I built mine with 22uF. It’s an old school value. If your chasing perfection then test your batch to see if there any with a lower value.
Yep, I built mine with 22uF. It’s an old school value. If your chasing perfection then test your batch to see if there any with a lower value.
szukalski Well-known member May 20, 2022 #4 I built with 22uF. 20uF with 20% tolerance is going to fall into that range.
TIA!
