Vero from Amazon or ebay

[BuddytheReow]

Just finished a Tayda order recently and forgot to add vero/stripboard. Anyone have a link to some decent and cheap Vero from Amazon or eBay US? Otherwise I've got to wait until my neuxt order which may be a month or two...

 

[zgrav]

I like these.

 

[Danbieranowski]

And here's another option: https://smile.amazon.com/gp/product/B088GSJM7G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

[Chuck D. Bones]

I like these.

I have some of those, have not tried them yet.

And here's another option: https://smile.amazon.com/gp/product/B088GSJM7G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Also have some of those, they work ok but the hole drilling/punching is sloppy and the long strips on the ends are useless. The substrate is phenolic, which is easy to cut but also likes to absorb moisture. I used to get epoxy-glass Vero boards on Amazon, but that seller discontinued them and the alternates are a little pricy.

My last couple of Vero builds were on Tayda strip-boards, also phenolic substrate. Probably the best bang-for-the-buck.

 

[BuddytheReow]

I like these.

Those looked like perfboard rather than stripboard. At least the pictures looked that way. Can you confirm they are strips?

 

[BuddytheReow]

And here's another option: https://smile.amazon.com/gp/product/B088GSJM7G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Those seem cheaper than tayda. I may try these in a pinch. I’ve got two strip boards left so maybe I’ll be ok until my next order. Are these pretty easy to work with?

 

[zgrav]

They are strips, even though they sort of look like perfboard.

 

[BuddytheReow]

Thanks!

 

[spi]

I've used these.
ST2 (Two-Pack) StripBoard, Uncut Strips, 1 Sided PCB, Size 2 = 100 x 80mm (3.94 x 3.15in)

They're a bit pricier but feel substantial.

 

[Danbieranowski]

Those seem cheaper than tayda. I may try these in a pinch. I’ve got two strip boards left so maybe I’ll be ok until my next order. Are these pretty easy to work with?

Just took my first shipment of them, so I'm not totally sure, but I'd trust @Chuck D. Bones opinion on them.