Vero help again

[drgonzo1969]

Ok, I’m wrapping up a metric shit ton of Vero projects I started a few months ago and I need help with the off board wiring of this dirtbox layouts version of the hyped fuzz. It uses a 4 pole 3 position switch and I can’t gather what goes where from the data sheet and layout. Can one of you guys tell me how to tell which is pin A and Pin 1 etc… thanks in advance. Here is a link to the layout and some photos. I’m building a pcb I bought from PedalPCB too to see how they sound back to back.

PedalPCB Hyped Fuzz

Two layouts of this one. One with DPDT on/on/on selector switch and one with rotary switch. Rotary switch layout is verified. DPDT la...

dirtboxlayouts.blogspot.com

 

[Feral Feline]

Take your DMM and test which outer pins have continuity with one of the inner 4 pins, that will be Sw-A.

Then rotate the switch one position and test again, and again one more time.

Then wire that inner pin to the vero-board Sw-A; wire the outer pins to Sw-1/2/3.

Not all pins of the Rotary will be used/wired up.

 

[drgonzo1969]

Ok nice! That makes sense. Thanks for the help!

 

[Feral Feline]

Ok nice! That makes sense. Thanks for the help!

Don't thank me yet. Wait until you Guinea-pig uhm test... my theory, and it works.