What’s on *YOUR* workbench?

jessenator said:


I͈̣̞̰̣̩̰̯̖͎̓͌̏͊̄̓͒̔̚͘ ͎̤͌̈wa̭̱͖̮̓͒̏͡͠ͅņ͉̥̗͇̤̫͆̔̆̇̒̌̂̏̑͢͢t̨̢̛͇̻̪͖̞̙͇̞̄̃̐͆̀̊̅̇̈͐͜ ̬͔̜̝͇̳͔͔̪̦̥͐̐̊͋̌̉̓͘̚͠͝tṑ̮͕͇̼͉̎͋̿͊͟ ̻̠̟̟͓̂̔̆͝͞b̆͜e̮̼̦͖̖̱͗̔̓̅̊̚͘ͅ ̭̟̲̳̒̃̍́p̨͙̀̕͜͝a̡̨͕̗͚̒̃͂̈́̓͢͠r̪͕̣̬̞͖̠̹̬͚͇̠͈̊̇̔͆̆̓͌̔̇͛̔̎̕t̡̡̢͓̯͚͕̗͉́͋̈́̍̿̅̋̏̾̕͜͢͡ ̱̺̰͉̳͉̳͇͒͋͂̓̓͆͘̕o̡̨͉̘̯̞̰̭̾̊̀͗̚̕͘͡f̡̡͉̖̪̳̀̓̋͐͗͐͘ͅ ͚̩̭̙͇̀͑̑͘͠y̞̺̙͈̘̼̓̔̓̊̒̒̈́͢ó͔̟͉̻͙̱͒̃̂̆̚ǘ͎̱̫̞̻͖̯͓͗͛̈́̚͘̕͠r̨̛̹̜̗̫͔̥̫͇̮͒͒͑͐̎́̏́̌͟͞ ̮̻̼̪̩̓̓̔͠͝ṕ̖̳͖̗͈̗͚͌̌͛͌̏̿̊͜ë̦̺͇̞̤͎̓͌͌̿͞d͙̱̻̝̖̙̠͚͆́͋̏̄̿̀̏͘̕͢͟a̱̾l̢̡̥̪̹̝͕͉̜͂̃̾͐͑͐̀͠͡ ͈̒ḅ̨̹͇͍̪̱͔̼̱͑̀̒̾̌̍̄̓̈́̎̀̀͢ͅǒ͔̲̙̥̰̰͉̻͎̳͛͋́̄̀́̕͘͟͞͞a̙͚̟͉̓̎̐̑̅͟r̡͈͇͔͖̦̮͔̃̄͒̀̑̓͗̚d̨͍̱̣͖̣͚̭̩̯̝̦͌͌͋̅̇͋̐͂͊̚̚͞,̧̯̮̻͖̬̤̱͙̭̑̉̍̌̾̄͂̃͑̒̕͜ ̩̙͈̘̱̐̃̇̀͡f̩̭̫̦͓͂̍͐̌͋a̧̨̟͈͇͍͕̼͓͉̳͑̿͑̎̅̒̌̀̅͘̚͢͠ẗ̲̙̩̭́̆̉̑h͎̓e͉̱̙̪͚͓̙̪͚̫̩̔̂̀̓̓̊̊͗́͗́͆͟r̡̹̰̟̻̰͕̠͚̭̺̘̮̫̠͉͊̿̏̈͌̎̂́́̒̏͋͂̀̉͡
w̛̮̜͙͙͍͖͔̜͙̝̐̄̋̂͒͜͠͡͝͞͡h͔̩̱͚̞̞̠̪̱͑̒̂̋̀̌̌̓͌̍̆͟ͅy̢̛͇̲̟͉̫͚̗̽̑̔͆̄́͠ ̡̦̞̗̗̟͉͙́̔̐̑̔͗͂̉ḧ̛̼̖̱͚͙͓͈̰̔̍̏̏̕͢͝͡a̧̨̝̤̻͓̰͚̟̟͓͂͂͌̔̅̄̂̆́̍̀͘͟͜͠v̜͕͉̈́̈͊͢͜͞e̻̮͙̠͖͙͗͊͐̋͊́̅̾͢͢ ̡̧͖͇̑̔͐̐͛ͅÿ̡̼͎͖̒̊͂̍͟o͚͔̮̮̔̈̋̇̚͜ư̤̘̱̯̝͈̥̮̭̻̞̂̈́̀̄̏̊̄̚͡͡ ̻̕f̛̘̫͖̼̠̳̮̦́̉̈́́̋̓͝ơ̪͓͊r̥͂ş̣͇̯͙̺̘̮̯̹͒̂̈̏̾͂̂͌͘̚̕͢ak͉͉̝̥̦̻̩̭͈̼͐̓̈́̇́́͌̌̎̈ē̱͟͡n͔̯̰̰̙̟̤̘͍̞͈̑̽̌̽͛̈̏͒̑̿͘̚͟ ̢͚̱̗̄̎̇̏̓͢m̝̹̉͘ẻ̞͙̠͕̖̗̗͎̗͎̂́͐͌̔̅͑̿͝

​

3AVHwoP.jpg
Click to expand...
Is that UV? Or did you break the acrylics out? That texture is amazing!
 
jwin615 said:
Is that UV? Or did you break the acrylics out? That texture is amazing!
Click to expand...
Haha. Thanks it's just me scraping off the powder coat with a flathead screwdriver, because I couldn't find my putty knife
1000006512.jpg

The dramatic lighting helps quite a lot :p

Just experimenting with removal of the stuff, but it's got its charms.


Edit: after a soak in acetone just to test its capabilities to soften/remove powder coat and UV.
The UV print wasn't printed on the correct enclosure/color/drill so it wasn't usable.
 
Last edited:
Nic said:
I've lived in an old house, when we opened the wall, we found a nice old wallpaper, then another one behind it, then another one... it's like going back through time.
Click to expand...
This was just a single layer of paper with the burlap backing on 1x6 wall lath… needless to say O don’t have to worry about mollys when mounting anything to the wall🤣
 
  • Like
Reactions: Nic
jessenator said:
Haha. Thanks it's just me scraping off the powder coat with a flathead screwdriver, because I couldn't find my putty knife
View attachment 66713

The dramatic lighting helps quite a lot :p

Just experimenting with removal of the stuff, but it's got its charms.


Edit: after a soak in acetone just to test its capabilities to soften/remove powder coat and UV.
The UV print wasn't printed on the correct enclosure/color/drill so it wasn't usable.
Click to expand...

Dude I totally hear ya! I had enclosure that I painted that I hated when it was done, WAY too busy. Decided to sand off the paint and start over and while sanding it, fell in love with the beat up look. This is a Bluesbreaker type clone before/after.

IMG_20240116_192740140.jpg
IMG_20240118_201218486.jpg
 
You must log in or register to reply here.
Back
Top