What pcbs are you getting for PedalPCB Black friday sale 2025?

I bought way too many and will probably build them through out the next year when I get the time. I really should have just purchased a bunch of enclosures to get all the pedals I've completed but not boxed done.

PedalPCB
  • Creamery Compressor
  • Pro Filter
  • Scabbard Overdrive
  • Mofeta Preamp
  • Chauffeur Overdrive
  • Leprechaun
  • Van Pelt Drive
  • Angry Charles
  • Seashore Overdrive
  • Angry Andy Plus
  • Danae Overdrive
  • 3 Channel Mixer
AionFX
  • L4 Preamp
  • L5 Preamp
  • 360 Bass Preamp
  • TS-50 Bass Preamp
  • TS-50 Guitar Preamp
  • VH Drive Channel
  • Orpheus Germanium
  • Astra
  • Beta Preamp
AA Electronics
  • SLO 100
  • The Champ
 
Low tide mini
Muroidea
Paragon
Obsidius
Doxie
Kewpie
Twin face
Dwarven Hammer
Various soic adaptors & components.



Still in the collection to build;
Aion Comet & Cirrus
Moonn dromtydning, turboboi, time waster, lowfo brofo, aztek sunn, asteroid

I have most of the parts for all of these from Tayda, with the exception of enclosures. Need to breadboard half of these to test mods
 
I guess the sale is winding down, but I ordered:
  • Muzzle (now that the THAT4301 is back in stock)
  • Equilux Mini
  • Duo-Phase
  • Scenario Preamp
  • Samarium Distortion
  • Vibrobot Tremolo
  • Kewpie Fuzz
  • Promethium Distortion
this is based on a various recommendations around the forum.
 
Look @jcpst with good taste. I have the electro vibe mini on order with the SMD XLR to see if it works with some preamps I’m building.
 
jcpst said:
I kept it minimal.

Phase II - I love the duo-phase. I want a smaller one, and I want to put the trimpot that adjust the filter on the outside.

ElectroVibe Mini w/ faceplate - It has a lamp in it!
Click to expand...
I have a Phase II, and I've been wanting to redo the enclosure. What does the filter trimpot do?
 
falco_femoralis said:
I have a Phase II, and I've been wanting to redo the enclosure. What does the filter trimpot do?
Click to expand...
Someone besides me can describe what it’s really doing, but the best I can give you is that it changes the ‘vowel’ of the sweep, like the overall range.
 
jcpst said:
Someone besides me can describe what it’s really doing, but the best I can give you is that it changes the ‘vowel’ of the sweep, like the overall range.
Click to expand...
The Madbean Glasshole (got one rapidly nearing the top of my “to be built” pile) which appears to have essentially the same trimpots, says this in the build doc:
“- T1 sets the swing from light to dark on D2. CCW is full depth and it gets more shallow as you go clockwise.
- T2 sets the maximum brightness. CCW is full brightness and the LED will dim as you turn it clockwise.

While I could write many words on calibration it’s much easier to just do it. Set your Depth at max, Rate about halfway and adjust trimmers to taste to get the best phase sweep you can. Now test those settings at the slowest and fastest
Rate settings. Tweak the trimmers to taste to get the best response possible over the full range of the Rate knob.
Do all this with your light shield covering the LDRs! Tip: The 1st half of T1 tends to be way too much and actually makes the phaser sweep sound doubled up (or maybe ‘ghosted’ is a better word).

For my build, I set both trimmers halfway. Feel free to use that as a starting point.”

Not sure if it’s T1 or T2 that @jcpst is referencing though…
 
You must log in or register to reply here.
Back
Top